Categories that include the term: ADHESIVE
|
Adhesives and Sealants |  |
Adhesives - General (Relevance 10/10)
Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak.
Some items in this category are marked as only available for collection.
|
Epoxies (Relevance 10/10)
ZAP, Molytec, Pacer. 5 and 30 minute. Metal filled and standard.
Some items in this category are marked as only available for collection.
|
Retaining Compounds (Relevance 10/10)
Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.
Some items in this category are marked as only available for collection.
|
Solder (Relevance 10/10)
|
Super Bonders (Relevance 10/10)
Mercury, ZAP, Molytec, Loctite, Pacer, Pro Seal. Cyanoacrylate adhesives for quick bonding. Products for foam Kicker, wood, metals, rubber and plastics.
Some items in this category are marked as only available for collection.
|
Threadlockers (Relevance 10/10)
ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.
Some items in this category are marked as only available for collection.
|
Model Kit Accessories | |
Model Kit Cement (Relevance 10/10)
Tamiya nd Mr Hobby Glue for plastic model kits
|
Materials | |
Solarbotics Materials (Relevance 3/10)
Versatile material for building robots because of its ability to glue well with epoxy and superglue.
Can be easily shaped by immersing in hot water and bending to your desired shape while it cools. Can be easily cut, drilled and threaded for screw fasteners. Do not use black Sintra with solar powered robots as it may get soft on hot days.
|
Cranks and Wheels | |
Cranks - Handwheel - Spoked (Relevance 1/10)
Pressed steel with RAL 9005 black epoxy resin coating. Hub: Welded with H9 tolerance plain hole (Type B) or through square H11 tolerance hole (Type V). Axial and radial runout lower than IT 12.
|
Handles and Knobs | |
Handles - Clean Line - Tubular (Relevance 1/10)
Aluminium tube with epoxy base coating, highly resistant to wear, scratches and chemical agents, in white similar to RAL 9002. Avoid continuous contact with boiling water or steam. Tube end caps in technopolymer, white colour similar to RAL 9002 with matte finish. Zinc-plated steel special screws and brass nuts.
|
Housings - Linear without Bearings | |
Housings - Linear - Open (Type 1) (Relevance 1/10)
Bearings not included.
Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.
|
Housings - Linear - Open (Type 2) (Relevance 1/10)
Bearings not included.
Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.
|
Housings - Linear - Standard (Relevance 1/10)
Bearings not included.
NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.
|
Housings to Suit Ball Bearings | |
Housings - Bearing - Blocks - Nylon (Relevance 1/10)
Moulded Nylon 101 Housing. Suit miniature bearings.
Inexpensive retention of small flanged radial bearings or bushes. Standard flanged bearings snap into these bearing blocks. Not intended for precision applications. A small drop of adhesive may be required to ensure bearing remains in place.
|
Housings - Bearing - Double Assembly - Circlip Retained (Relevance 1/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Single Assembly (Relevance 1/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Single Assembly - Circlip Retained (Relevance 1/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings with Integral Bearing | |
Housings - Bearing - Blocks - Nylon with Stainless Bearing (Relevance 1/10)
Moulded Nylon 101 Housing with 440C Stainless Bearing.
Bearing block: Nylon / Bearing: 440C Stainless / Insert: 52100 Chrome Steel. High Performance. Housing is Electrically Insulating. Not intended for precision applications. Inner assembly not fixed in place. Can be used as a floating assembly or fixed using conventional adhesives or circlips.
|
Materials | |
H Section - Carbon Fibre (Relevance 1/10)
High impact light weight carbon fibre for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish
|
Rod - Round - Carbon Fibre (Relevance 1/10)
High impact light weight carbon fibre for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish Items marked as Low Grade may have tolerance variations up to 0.2mm
|
Tube - Rectangular - Carbon Fibre (Relevance 1/10)
High impact light weight carbon fibre hollow tubing for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish
|
Tube - Round - Carbon Fibre (Relevance 1/10)
High impact light weight carbon fibre hollow tubing for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish Items marked as Low Grade may have tolerance variations up to 0.2mm
|
Tube - Square - Carbon Fibre (Relevance 1/10)
High impact light weight carbon fibre tubing for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish Items marked as Low Grade may have tolerance variations up to 0.2mm
|
Plain Bearings | |
Bushes - Aluminium - Frelon Lined (Relevance 1/10)
Self lubricating - Replaces oilite or plastic bearings.
SLIP FIT: Housing bore should be OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be OD -0.000/+0.010. Use freezing method for press fit assembly - freeze bearing to -18 Deg C for 30 minutes. Body: Aluminium. Lining: Frelon.
|
Springs | |
Gas Springs - Adjustable - 50-540N (Relevance 1/10)
Body: Semi Matt Black Epoxy Paint. Finish: Black. Adjusted by Grubscrew. Once discharged, the gas is not refillable. Supplied filled to maximum force.
|
|
