Categories that include the term: BEARING
|
Bearings |  |
Bearings - Ball - 440C Stainless 6000 / 6200 / 6300 Series (Relevance 10/10)
Stainless Steel 440C Grade - Hardened - Precision - Corrosion Resistant.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire.
|
Bearings - Ball - Single Row - Radial - Economy (Relevance 10/10)
Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.
|
Bearings - Ball - Single Row - Radial - Flanged (Relevance 10/10)
Stainless and Chrome Steel Bearings with Flanges.
Single Row Radial Ball Bearings. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.
|
Bearings - Ball - Single Row - Radial - Unflanged (Relevance 10/10)
Stainless and Chrome Steel Bearings.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.
|
Bearings - High Speed Cage (Relevance 10/10)
Bearings with cages for high speed applications, including phenolic, nylon and polyamide.
Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require.
|
Skate Bearings (Relevance 10/10)
Bearings for use with skates and skate boards.
|
Bearings - Clutch | |
Bearings - One Way - Sprag - Standard (Relevance 10/10)
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes. Designed for press fit installation.
|
Bearings - One Way - Sprag - TFS (Relevance 10/10)
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - One Way - Sprag - TSS (Relevance 10/10)
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - Grooved | |
Bearings - Square Groove Profile OD (Relevance 10/10)
Special bearings. Not readily available.
|
Bearings - U Groove Profile OD (Relevance 10/10)
Special OD Bearings.
Contact us for tolerances.
|
Bearings - V Groove Profile OD (Relevance 10/10)
Special OD Bearings.
|
Bearings - Needle Roller | |
Bearings - Needle Roller - Cage Type (Relevance 10/10)
Cage and Rollers.
|
Bearings - Needle Roller - Inner Rings (Relevance 10/10)
Hardened sleeves for needle roller bearings.
|
Bearings - Needle Roller - Machined - With Inner Ring (Relevance 10/10)
|
Bearings - Needle Roller - Machined - Without Inner Ring (Relevance 10/10)
|
Bearings - Needle Roller - Shell Type (Relevance 10/10)
Light Weight. Compact Design.
|
Bearings - Specialty | |
Bearings - Acetal - with 302 Stainless Steel Balls (Relevance 10/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Acetal - with 316 Stainless Steel Balls (Relevance 10/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Acetal - with Glass Balls (Relevance 10/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Automotive - Tapered Roller (Relevance 10/10)
|
Bearings - Ball - 304 Stainless Steel (Relevance 10/10)
Corrosion and Heat resistance - Non Magnetic - Unhardened.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.050 mm / -0.000 mm OD +0.000 mm / -0.030 mm Width +0.000 mm /- 0.120 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.
|
Bearings - Ball - 316 Stainless Steel (Relevance 10/10)
Food and Medical grade Stainless Steel - Non Hardenable.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.
|
Bearings - Ball - Double Row - Angular Contact (Relevance 10/10)
Double Row Ball Bearings - Angular Contact.
|
Bearings - Ball - Double Row - Radial (Relevance 10/10)
|
Bearings - Ball - Double Row - Self Aligning (Relevance 10/10)
|
Bearings - Ball - Single Row - Angular Contact (Relevance 10/10)
Inclusing miniature sizes down to 8mm from stock and even smaller available.
|
Bearings - Ball - Single Row - Radial - Flanged - High Precision (Relevance 10/10)
Stainless and Chrome Steel Bearings with Flanges - Abec 5 and Abec 7.
Single Row Radial Ball Bearings. Miniature sizes from 1mm bore to over 50mm bore. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
|
Bearings - Ball - Single Row - Radial - Unflanged - High Precision (Relevance 10/10)
Stainless and Chrome Steel Bearings - Abec 5 and Abec 7.
Single Row Radial Ball Bearings. Miniature sizes from 1mm bore to over 50mm bore. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
|
Bearings - Ball - Single Row - Self Aligning (Relevance 10/10)
Includes miniature sizes from 6mm bore.
|
Bearings - Ball - Textile Industry (Relevance 10/10)
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Not all Bearings are readily available. Please enquire. Designed for use in textile industry machinery.
|
Bearings - Ceramic Hybrid (Relevance 10/10)
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily.
|
Bearings - Ceramic Si3N4 (Relevance 10/10)
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
|
Bearings - Ceramic ZrO2 (Relevance 10/10)
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
|
Bearings - Chamfered Edges (Relevance 10/10)
Chamfered edge bearings for Linear Guide Systems.
|
Bearings - Conveyor - Hex Bore (Relevance 10/10)
Plastic and Stainless Steel.
Loads and Speeds are for reference only. Testing recommended.
|
Bearings - Gothic Groove Profile OD (Relevance 10/10)
Bearings with a Gothic Groove in OD. Round Track Rolling Applications.
Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.
|
Bearings - Hydrodynamic Pressure (Relevance 10/10)
Alternative to ball bearings - quiet operation - patented design.
Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.
|
Bearings - One Way - Roller (Relevance 10/10)
Roller Clutch Bearings rotate in one direction only.
Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.
|
Bearings - Pivot - Flanged (Relevance 10/10)
|
Bearings - Precision Scale (Relevance 10/10)
Bearings for scales.
Note! Minimum quantities apply to production of these items.
|
Bearings - Spherical OD (Relevance 10/10)
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
|
Bearings - Unground (Relevance 10/10)
Unground bearings used in trolleys, prams and wheel barrow wheels
|
Model Jet Turbine Bearings (Relevance 10/10)
Bearings developed specifically for use in Model Jet turbines.
These bearings are designed for high speeds usually between 80,000 and 120,000 RPM in short runs. Speeds over 120,000 are often obtainable. Testing is required. High Temperature up to 300 Degrees Celsius. Bearing Type R in the tables indicates Radial (refer our main bearings category).
|
Bearings - Thrust | |
Bearings - Thrust - Ball (Relevance 10/10)
3 Piece Thrust Bearings, Shielded and Unshielded.
|
Bearings - Thrust - Ball - Banded (Relevance 10/10)
|
Bearings - Thrust - Ball - Retainer and Balls Only (Relevance 10/10)
Match with thrust washers of the same bore and OD.
|
Bearings - Thrust - Ball - Washers Only (Relevance 10/10)
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.
|
Bearings - Thrust - Plastic - Self Seating (Relevance 10/10)
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
|
Bearings - Thrust - Roller (Relevance 10/10)
Washers and Rollers sold separately. Please select the appropriate washers (2) and roller assembly to complete a set.
Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.
|
Lazy Susan Bearings (Relevance 10/10)
One unit construction for maximum stability and quiet running.
Centre opening allows for a centre post if required.
|
Bearings and Housings | |
Bearings - Press - Acetal - Flange Mounted (Relevance 10/10)
Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 Deg C. Self lubricating. Use any shaft material with 0.4 um or finer finish.
|
Bearings - Press - Needle Roller - Flange Mounted (Relevance 10/10)
Fitted with drawn cup needle bearing. -30 to 110 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer.
|
Bearings - Press - Sintered Bronze (Relevance 10/10)
Self lubricating. -28 to +95 Deg C. Use any shaft material with 0.8 um or finer finish. Self aligning +/- 5 Degress.
|
Bearings - Press - Sintered Bronze - Flange Mounted (Relevance 10/10)
Porous sintered bronze bearing. -28 to 95 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
|
Bearings - Spyraflo - Flange Mount - Non Aligning (Relevance 10/10)
Low profile flange mounted needle roller and bronze bearings
See links at bottom of web page for more information
|
Bearings - Spyraflo - Flange Mount - Self Aligning (Relevance 10/10)
Low profile self aligning flange mounted needle roller, acetal and bronze bearings
See links at bottom of web page for more information +/- 5% Static Alignment
|
Bearings - Spyraflo - Flanged Housing - Self Aligning (Relevance 10/10)
Robust light weight aluminium housing with self aligning needle roller or bronze bearings.
See links at bottom of web page for more information +/- 5% Static Alignment Sintered aluminium housing Corrosion Resistant Light weight
|
Bearings - Spyraflo - Flanged Housing - Washdown (Relevance 10/10)
Electroless nickel plated aluminum housing with self aligning Stainless Steel covered Acetal bearing.
See links at bottom of web page for more information +/- 5% Static Alignment Electroless nickel plated aluminium housing Corrosion Resistant Light weight
|
Bearings - Spyraflo - Pillow Block - Self Aligning (Relevance 10/10)
Robust light weight aluminium housing with self aligning needle roller or bronze bearings.
See links at bottom of web page for more information +/- 5% Static Alignment Sintered aluminium housing Corrosion Resistant Light weight
|
Bearings - Spyraflo - Pillow Block - Washdown (Relevance 10/10)
Electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.
See links at bottom of web page for more information +/- 5% Static Alignment Electroless nickel plated aluminium housing Corrosion Resistant Light weight
|
Bearings - Spyraflo - Press-Fit - Self Aligning (Relevance 10/10)
Needle roller, bronze and acetal bearings in specially designed press fit retainers
See links at bottom of web page for more information +/- 5% Static Alignment Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.
|
Bearings - Spyraflo - Self Clinching - Non Aligning (Relevance 10/10)
Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information See animation link at bottom of web page Panel material no harder than RB65/RB75 Panel hole to be punched or machined to size A (+0.07/-0.00mm)
|
Bearings - Spyraflo - Self Clinching - Self Aligning (Relevance 10/10)
Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information +/- 5% Static Alignment See animation link at bottom of web page Panel material no harder than RB65/RB75 Panel hole to be punched or machined to size A (+0.07/-0.00mm)
|
Housings - Bearing - Pillow Block - Miniature (Relevance 10/10)
Aluminium pillow block housings mounted with 440C stainless miniature bearings
No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings Double shielded bearings to minimise contamination
|
Dental Products | |
Bearings - Dental Applications (Relevance 10/10)
See Dental Handpiece Bearings and Orings for applications by model.
This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.
|
Bearings and Oring kits for Dental Handpieces (Relevance 10/10)
Kits of Bearings - Orings - and Washers.
|
Fasteners | |
Nuts - Lock - For Bearings - Left Hand Thread (Relevance 10/10)
NL series used for high rotational parts.
|
Nuts - Lock - For Bearings - Metric AN Series (Relevance 10/10)
N / AN series locknuts.
Use with W series lockwashers.
|
Nuts - Lock - For Bearings - Metric KM Series (Relevance 10/10)
Use with MB series lockwashers.
|
Nuts - Lock - For Bearings - Thin Section (Relevance 10/10)
NT/NTH series thin section.
With a smaller OD and thinner section uses less space and weigh less than a standard locknut. Used in aircraft, electronics and small bearing machine tools.
|
Guide Rails - Tracks and Bearings | |
Dual Vee - Adaptor Bushings (Relevance 10/10)
Vee grooved track roller bushings.
Stationary bushings have a concentric hole Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned
|
Dual Vee - Guide Wheels (Relevance 10/10)
Vee grooved track roller guide wheels with Abec 5 precision bearings.
Match with correct Track Size.
|
Dual Vee - Guide Wheels - Studded (Relevance 10/10)
Vee grooved track roller guide wheels.
Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.
|
Dual Vee - Tracks with Mounting Holes (Relevance 10/10)
Vee tracks for vee grooved track roller guide wheels.
Match Track Size with same size Guide Wheel.
|
Dual Vee - Tracks without Mounting Holes (Relevance 10/10)
Vee tracks for vee grooved track roller guide wheels.
Match Track Size with same size Guide Wheel.
|
Dual Vee - Wheel Plate Assembly - Wiper (Relevance 10/10)
Use with wheel plate assembly track.
Rail sold seperately. Match with correct Rail Size.
|
Utilitrak Carriage Assemblies (Relevance 10/10)
Use with Utilitrak Guiderails
Carriage assembly only Use with rails found in category Guide Rails - Utilitrak
|
Utilitrak Guide Rails (Relevance 10/10)
Use with Carriage Assemblies - Utilitrak
Guide Rails only. Use with Carriage Assemblies found in category Carriage Assemblies - Utilitrak
|
Hobby Condensed Selection | |
Hobby Bearings - Ceramic Ball (Relevance 10/10)
A small selection of popular sizes.
See main listings for sizes not shown here. ZZ Type = Crimped metal shields both sides. ZZS = Removable metal shields both sides. 2RS = Contact rubber seals both sides. 2RU or 2RB = Semi-Contact rubber seals both sides.
|
Hobby Bearings - Flanged (Relevance 10/10)
A small selection of popular sizes.
See main listings for sizes not shown here. ZZ Type = Crimped metal shields both sides. ZZS = Removable metal shields both sides. 2RS = Contact rubber seals both sides. 2RU or 2RB = Semi-Contact rubber seals both sides.
|
Hobby Bearings - Model Engine (Relevance 10/10)
Popular engine bearings by size.
See main listings for sizes not shown here. T9H, KC, KB, TNH are all high speed cage versions. See technical page for more information. Z Type = Metal Shield one side, ZZ = Metal Shield both sides, ZZS = Removable metal shields both sides. RS = Contact rubber seal one side, 2RS = Contact rubber seals both sides. RU or RB = Semi-Contact rubber seal one side, 2RU or 2RB = Semi-Contact rubber seal both sides.
|
Hobby Bearings - Roller Clutch (Relevance 10/10)
Roller Clutch Bearings rotate in one direction only. Drawn Cup Type.
The roller clutches in this listing are all DRAWN CUP TYPE. Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm. Refer to main listing for Roller Clutches for sizes not listed here.
|
Hobby Bearings - Thrust (Relevance 10/10)
A small selection of popular sizes.
See main listings for sizes not shown here. All unsealed.
|
Hobby Bearings - Unflanged (Relevance 10/10)
A small selection of popular sizes.
See main listings for sizes not shown here. ZZ Type = Crimped metal shields both sides. ZZS = Removable metal shields both sides. 2RS = Contact rubber seals both sides. 2RU or 2RB = Semi-Contact rubber seal both sides.
|
Housings - Linear with Bearings | |
Housings - Linear - Pillow Block (Relevance 10/10)
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Housings - Linear - Thomson Super (Pillow Block - Closed) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super (Pillow Block - Open) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super (Twin Pillow Block - Closed) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super (Twin Pillow Block - Open) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super Smart (Flanged) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super Smart (Pillow Block - Closed) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Thomson Super Smart (Pillow Block - Open) (Relevance 10/10)
Includes Bearings.
|
Housings - Linear - Twin Pillow Block (Relevance 10/10)
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Housings - Linear without Bearings | |
Housings - Linear - Dual Rail (Relevance 10/10)
Bearings not included.
Material: Aluminium.
|
Housings - Linear - Open (Type 1) (Relevance 10/10)
Bearings not included.
Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.
|
Housings - Linear - Open (Type 2) (Relevance 10/10)
Bearings not included.
Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.
|
Housings - Linear - Standard (Relevance 10/10)
Bearings not included.
NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.
|
Housings to Suit Ball Bearings | |
Housings - Bearing - 2 Bolt Mounting Plates (Relevance 10/10)
Chromic Anodised Aluminium mounting plates.
For standard radial ball bearings.
|
Housings - Bearing - Blocks - Nylon (Relevance 10/10)
Moulded Nylon 101 Housing. Suit miniature bearings.
Inexpensive retention of small flanged radial bearings or bushes. Standard flanged bearings snap into these bearing blocks. Not intended for precision applications. A small drop of adhesive may be required to ensure bearing remains in place.
|
Housings - Bearing - Double Assembly - Circlip Retained (Relevance 10/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Flanged - Miniature (Relevance 10/10)
Chromic Anodised Aluminium double or single flanged housings.
For standard radial ball bearings.
|
Housings - Bearing - Hanger - Miniature (Relevance 10/10)
Chromic Anodised Aluminium hanger housings.
For standard radial ball bearings.
|
Housings - Bearing - Single Assembly (Relevance 10/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Single Assembly - Circlip Retained (Relevance 10/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Square - Miniature (Relevance 10/10)
Aluminium housings to suit standard radial ball bearings.
Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.
|
Housings with Integral Bearing | |
Housings - Bearing - Blocks - Bronze Bearing (Relevance 10/10)
Aluminium with 5 percent self aligning sintered bronze bearing.
Bearing: Bronze SAE 840 (oil impregnated). / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. The performance of a plain bearing is stated as a PV value, which is the product of a pressure and velocity.
|
Housings - Bearing - Blocks - Die Cast (Relevance 10/10)
Zinc Die Cast Housings with or without Sintered Bronze Bearings.
Lubricable. With or without standard sintered bronze bearings.
|
Housings - Bearing - Blocks - Frelon Lined (Relevance 10/10)
Self aligning. Open or closed. Precision or standard. For rotating and linear motion.
|
Housings - Bearing - Blocks - Nylon with Ertalyte Bearing (Relevance 10/10)
Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.
Self-Lubricating. High Performance. Electrically Insulating.
|
Housings - Bearing - Blocks - Nylon with Stainless Bearing (Relevance 10/10)
Moulded Nylon 101 Housing with 440C Stainless Bearing.
Bearing block: Nylon / Bearing: 440C Stainless / Insert: 52100 Chrome Steel. High Performance. Housing is Electrically Insulating. Not intended for precision applications. Inner assembly not fixed in place. Can be used as a floating assembly or fixed using conventional adhesives or circlips.
|
Housings - Bearing - Blocks - Thermoplastic (Relevance 10/10)
Iglide L280 / Igus W300 Ball with Thermoplatic Body.
Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 deg C to +130 deg C. Max. Static Tensile Strength is Long Term. Info for Short Term also available.
|
Housings - Bearing - Flanged - 2 Bolt Hole - W300 (Relevance 10/10)
With integral self aligning plain bearing.
Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.
|
Housings - Bearing - Flanged - Bronze Bearing (Relevance 10/10)
±5° Static Alignment.
Bearing: Bronze SAE 840 (oil impregnated). Housing: Sintered Aluminium. Bearing Retainer: Outer retainer is steel (which is clinched into Aluminium housing) with a Nylon washer on first face. Apply appropriate factor of safety to the nominal loads and speeds specified. Mating shaft rec. Min. 100 HRB. Max surface finish 16 RMS. Rec. shaft clearance 0.013 - 0.038mm.
|
Housings - Bearing - Flanged - Square - W300 (Relevance 10/10)
With integral self aligning plain bearing.
Housing : Igumid G. Ball : Highly wear resistant Iglidur W300.
|
Housings - Igubal - Sliding (Relevance 10/10)
Housing: Aluminium. Insert: Sliding film Iglidur® J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.
|
Insert Bearings and Housings | |
Bearings - For Cast Iron Housings (Relevance 10/10)
With spherical OD for use with cast iron flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2 Degrees, but can accommodate up to 6 Degrees. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.
|
Bearings - For Plastic Housings (Relevance 10/10)
Ideal for wet conditions. Includes Acetal and Stainless grades 316 and 440C
Load and speed calculations are for reference only. Testing is recommended.
|
Bearings - For Pressed Metal Housings (Relevance 10/10)
With spherical OD for use with pressed metal flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2 Degrees, but can accommodate up to 6 Degrees. Also available with eccentric locking collars on request.
|
Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron (Relevance 10/10)
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
|
Housings - Bearing - Flanged - 2 Bolt Hole - Plastic (Relevance 10/10)
Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.
|
Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal (Relevance 10/10)
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
|
Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal (Relevance 10/10)
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
|
Housings - Bearing - Flanged - Offset - Cast Iron (Relevance 10/10)
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
|
Housings - Bearing - Flanged - Round - Cast Iron (Relevance 10/10)
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
|
Housings - Bearing - Flanged - Square - Cast Iron (Relevance 10/10)
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
|
Housings - Bearing - Pillow Block - Cast Iron (Relevance 10/10)
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
|
Housings - Bearing - Pillow Block - Plastic (Relevance 10/10)
Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.
|
Housings - Bearing - Pillow Block - Pressed Metal (Relevance 10/10)
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
|
Linear Ball Splines | |
Linear Ball Splines - Bearings - Flanged (Relevance 10/10)
Use with Linear Ball Spline Shaft.
|
Linear Ball Splines - Bearings - Unflanged (Relevance 10/10)
Use with Linear Ball Spline Shaft.
|
Linear Motion Bearings | |
Bearings - Linear - Ball (Relevance 10/10)
Adjustable and fixed types - open for running on a supported rail and closed for fixed shafts.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg C Intermittent, 80 Deg C continuous.
|
Bearings - Linear - Ball - Miniature - High Precision (Relevance 10/10)
High Precision Corrosion Resistant Miniature Linear Bearings.
High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.
|
Bearings - Linear - Ball - Thomson Precision Steel (Closed) (Relevance 10/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Precision Steel (Open) (Relevance 10/10)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super (Closed) (Relevance 10/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super (Open) (Relevance 10/10)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super Smart (Closed) (Relevance 10/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super Smart (Open) (Relevance 10/10)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Frelon Lined (Relevance 10/10)
|
Bushings - Stroke Rotary - Miniature (Relevance 10/10)
2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.
Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100°C (Constant), +120°C (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.
|
Bushings - Stroke Rotary - Sealed (Relevance 10/10)
Stroke Rotary Bushing series can operate in both linear and rotary directions at the same time.
Material: Carbon Steel. The fit of Stroke Rotary Bushing with shaft and housing is recommend as shown in Table 1 of the diagram. Actual Stroke Length should be less than 80% of max. stroke. Mating Shafts should be HRC58-64. Surface roughness 0.85 or better. Oil holes provided for lubrication.
|
Crossed Roller Way (Relevance 10/10)
For precise linear motion.
Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C ( Constant), +140°C (Maximum). For temperatures over 100°C we can supply special high temperature grease (200°C - supplied in syringe) CG2-SY.
|
Linear Motion Bearings - Drylin | |
Linear Slide - Drylin - Accessories (Relevance 10/10)
Insensitive to dust and dirt.
Carriage blocks and half slide rail. Make your own custom sized assemblies. Replace blocks on carriage assemblies. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.
|
Linear Slide - Drylin - Carriage Assembly (Relevance 10/10)
Insensitive to dust and dirt. Match with Drylin Rail sold seperately.
Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.
|
Linear Slide - Drylin - Rail (Relevance 10/10)
Insensitive to dust and dirt. Match with Drylin Carriage Assembly sold seperately.
Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.
|
Linear Motion Bearings - Drylin Assemblies | |
Drylin Linear Assembly Parts - Carriage Only (Relevance 10/10)
Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.
Drylin® T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.
|
Drylin Linear Assembly Parts - Guide Rails Only (Relevance 10/10)
These rails require a matching carriage as listed in a separate category. Match by size.
Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50µm Hardness: 500HV. Matching components listed in separate category.
|
Drylin Linear Assembly Parts - Pinion Assembly Only (Relevance 10/10)
These pinion assemblies require a matching carriage and rack as listed in separate categories. Match by size.
Pinion Assembly Body: Aluminium. Gear: Stainless steel. Bearings: Steel. Working Temperature Range: 0°C to +60°C. Designed to be attached to TW carriages using specific rack rail.
|
Drylin Linear Assembly Parts - Rack and Rail Only (Relevance 10/10)
These rack and rails require a matching carriage and pinion assembly as listed in separate categories. Match by size.
Working Temperature Range: 0°C to +60°C. Available in 500mm lengths. Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50µm Hardness: 500HV. Refer to Standard Rail for basic dimensions.
|
Linear Motion Bearings - Drylin Bushings | |
Drylin Sliding Bearings (Relevance 10/10)
Linear sliding motion. Use with Drylin Aluminium Shafts.
Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: < 2 N/mm2. Maximum Speed: 8 m/s (dry) >10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60°C to +100°C (increased wear when used in excess of 80°C).
|
|
