Hobby & Engineering Supplies - an MBA company

Belts flat categories




NO CATEGORIES OR PARTS FOUND

Unfortunately we don't seem to be able to find any categories or parts matching your search for belts flat

Many items that used to be sold by HES are now available at Small Parts and Bearings. Please check to see if belts flat is still available from Small Parts and Bearings.


RC Helicopter Parts


Belt CP E-Sky Parts
Belt CP E-Sky Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Vee Belts


Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

There is also a good range of Belts - Vee - 10.0 x 5.5mm - M-3L on the Small Parts and Bearings website.


Belts - Vee - 8.0 x 4.0mm
Belts - Vee -  8.0 x 4.0mm

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly. This category may be available in the new MBA online store at Belts - Vee - 8.0 x 4.0mm.

Related Information:

There is also a good range of Belts - Vee - 8.0 x 4.0mm on the Small Parts and Bearings website.


Belts Timing XL Pitch 5.08mm


Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Belts - Timing -  5.080mm Pitch - XL -  7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide on the Small Parts and Bearings website.


Power Tool Parts


KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of KA85 Belt Sander Black and Decker Parts on the Small Parts and Bearings website.


Washers Flat Fibre


Washers - Flat - Fibre
Washers - Flat - Fibre

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Related Information:

There is also a good range of Washers - Flat - Fibre on the Small Parts and Bearings website.


Washers Flat Metallic


Washers - Flat - Aluminium - Precision Shim
Washers - Flat - Aluminium - Precision Shim

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

This category may be available in the new MBA online store at Washers - Flat - Aluminium - Precision Shim.

Related Information:

There is also a good range of Washers - Flat - Aluminium - Precision Shim on the Small Parts and Bearings website.


Washers - Flat - Brass - Commercial
Washers - Flat - Brass - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD. This category may be available in the new MBA online store at Washers - Flat - Brass - Commercial.

Related Information:

There is also a good range of Washers - Flat - Brass - Commercial on the Small Parts and Bearings website.


Washers - Flat - Mild Steel
Washers - Flat - Mild Steel

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD. This category may be available in the new MBA online store at Washers - Flat - Mild Steel.

Related Information:

There is also a good range of Washers - Flat - Mild Steel on the Small Parts and Bearings website.


Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers. This category may be available in the new MBA online store at Washers - Flat - Stainless Steel 304 - Commercial.

Related Information:

There is also a good range of Washers - Flat - Stainless Steel 304 - Commercial on the Small Parts and Bearings website.


Power Tool Parts


BSG-151 Belt Sander Ozito Parts
BSG-151 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSG-151 Belt Sander Ozito Parts on the Small Parts and Bearings website.


BSR-1000 Belt Sander Ozito Parts
BSR-1000 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSR-1000 Belt Sander Ozito Parts on the Small Parts and Bearings website.


BSR-800 Belt Sander Ozito Parts
BSR-800 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSR-800 Belt Sander Ozito Parts on the Small Parts and Bearings website.


RC Car Parts


1-10 Belt Drive Colt Parts
1-10 Belt Drive Colt Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


TA03 - TA03F Chassis Belt Drive Tamiya Parts
TA03 - TA03F Chassis Belt Drive Tamiya Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Screws Grub


Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.


Vacuum Cleaner Belts


Freejet Hoover Parts
Freejet Hoover Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Freejet Hoover Parts on the Small Parts and Bearings website.


Multi Models Dyson Parts
Multi Models Dyson Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Multi Models Dyson Parts on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Brass - Slotted
Screws - Countersunk - Brass - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk METRIC and BSW

Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Countersunk - Brass - Slotted.

Related Information:

There is also a good range of Screws - Countersunk - Brass - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Steel on the Small Parts and Bearings website.


Screws - Countersunk - Stainless - Pozidrive
Screws - Countersunk - Stainless - Pozidrive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Countersunk - Stainless - Pozidrive.

Related Information:

There is also a good range of Screws - Countersunk - Stainless - Pozidrive on the Small Parts and Bearings website.


Screws - Countersunk - 304 Stainless - Philips
Screws - Countersunk - 304 Stainless - Philips

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Countersunk - 304 Stainless - Philips.

Related Information:

There is also a good range of Screws - Countersunk - 304 Stainless - Philips on the Small Parts and Bearings website.


Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks. This category may be available in the new MBA online store at Screws - Countersunk - Socket - 304 Stainless.

Related Information:

There is also a good range of Screws - Countersunk - Socket - 304 Stainless on the Small Parts and Bearings website.


Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Countersunk - Titanium CP Grade 1 - Philips Drive.

Related Information:

There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991 on the Small Parts and Bearings website.


You may also be interested in

RC Spare Parts


RC Spare Parts - Great Vigor
RC Spare Parts - Great Vigor


Great Vigor spare parts listed by description. Parts to suit 1/10 scale, 1/6 scale, Buggies, Truggies, 2WD, 4WD, BV1, Cage Buggy, Belt Crusher, Electrafun, Nitro Cage, Hunter Buggy, Rex-x

This category may be available in the new MBA online store at RC Spare Parts - Great Vigor.


RC Spare Parts - Venom
RC Spare Parts - Venom


Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli

Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.


Nuts - Hexagonal - Brass
Nuts - Hexagonal - Brass

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size. This category may be available in the new MBA online store at Nuts - Hexagonal - Brass.

There is also a good range of Nuts - Hexagonal - Brass on the Small Parts and Bearings website.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Disc Springs PDF Dowel Pins PDF Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 5838 products in 245 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 5838 products in 245 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.