Categories that include the term: CERAMIC
|
Balls |  |
Balls - Ceramic - Silicon Nitride (Relevance 10/10)
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
|
Balls - Ceramic - Zirconia (Relevance 10/10)
Outstanding wear resistance. Excellent thermal and chemical resistance.
|
Bearings - Specialty | |
Bearings - Ceramic Hybrid (Relevance 10/10)
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily.
|
Bearings - Ceramic Si3N4 (Relevance 10/10)
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
|
Bearings - Ceramic ZrO2 (Relevance 10/10)
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
|
Hobby Condensed Selection | |
Hobby Balls - Ceramic (Relevance 10/10)
Popular Sizes.
High hardness. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
|
Hobby Bearings - Ceramic Ball (Relevance 10/10)
A small selection of popular sizes.
See main listings for sizes not shown here. ZZ Type = Crimped metal shields both sides. ZZS = Removable metal shields both sides. 2RS = Contact rubber seals both sides. 2RU or 2RB = Semi-Contact rubber seals both sides.
|
Magnets | |
Magnets - Ceramic Blocks (Relevance 10/10)
Low cost, light weight, high energy material
Non conductive hard brittle material Performs best at temperatures below 249 Deg C Can be cut with a diamond wheel Difficult to grind and can't be machined or drilled by normal methods Tolerance 0.13mm on all dimensions
|
Magnets - Ceramic Ring (Relevance 10/10)
|
Springs | |
Gas Springs - Adjustable - Push Type - Max 100N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 180N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 400N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 700N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 1300N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 2600N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 5000N (Relevance 1/10)
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force).
|
No more categories match your selection
|
