Categories that include the term: SCREWS
|
Castors |  |
Ball Transfer Units - Screw Stem (Relevance 10/10)
For conveying materials. From miniature to large.
Measuring equipment. Lightweight coilhander. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.
|
Clamping and Locking | |
Clamps - Gear - Screw Type (Relevance 10/10)
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.
|
Insulators - Screw (Relevance 10/10)
Nonconductive. Noncorrosive. Lightweight. Self-sealing. Self-locking.
|
Couplings | |
Couplings - Bellows - External Clamp and Set Screw - Brass (Relevance 10/10)
Zero Backlash - Tin Plate - Angular Misalignment up to 5 Degree
Phosphor Bronze Bellows Brass set screw hub one end, berrylium copper clamp hub other end Match with precision or commercial gear clamps - see link
|
Couplings - Bellows - Set Screw - 316 Stainless (Relevance 10/10)
Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics
Stainless Steel 303L Bellows Stainless Steel 316 Hubs
|
Couplings - Bellows - Set Screw - Aluminium (Relevance 10/10)
Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics
Phosphor Bronze Bellows Aluminium Hubs
|
Couplings - Bellows - Set Screw - Brass (Relevance 10/10)
Phosphor Bronze Bellows Brass Hubs
|
Couplings - Bellows - Set Screw - Brass with Tin Plate Finish (Relevance 10/10)
Phosphor Bronze Bellows Brass with Tin Plate Finish Hubs
|
Fasteners | |
Screws - Coach - Stainless Steel (Relevance 10/10)
|
Screws - Hex Head - Flanged - Titanium Grade 5 (Relevance 10/10)
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Flanged Hexagon Head - hot forged and machined head with rolled thread. Grade 2 Titanium available made to order, also other fastener shapes.
|
Screws - Hex Head - Lag - Miniature (Relevance 10/10)
UNC - UNF Brass Lag Screws
|
Screws - Hex Head - Plastic (Relevance 10/10)
UNC - UNF - METRIC - Nylon and PVC.
|
Screws - Hex Head - Steel (Relevance 10/10)
UNC - UNF - METRIC - Bolts and Set Screws.
|
Screws - Hex Head - Titanium Grade 1 (Relevance 10/10)
Fully threaded hex head screws (DIN933)
CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Din 933.
|
Screws - Large Shallow Head (Relevance 10/10)
UNC - UNF - METRIC - Various Materials.
|
Screws - Machine - Aluminium (Relevance 10/10)
Metal Thread Screws UNC.
Nuts sold separately - See Fasteners - Nuts.
|
Screws - Machine - Brass (Relevance 10/10)
Metal Thread Screws UNC - UNF - BA - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Brass - Countersunk Head (Relevance 10/10)
Flat Head Countersunk UNC - UNF - BA - METRIC - Various Head Types.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Nylon (Relevance 10/10)
UNC / UNF / Metric. Pan head, cheese head, binder head.
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
|
Screws - Machine - Nylon - Countersunk Head (Relevance 10/10)
Flat Head Countersunk UNC and UNF.
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
|
Screws - Machine - PEEK - Pan Head (Relevance 10/10)
PEEK is a super-engineering thermoplastic used for its special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of Vitre™.
Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180 Degrees Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.
|
Screws - Machine - Stainless Steel (Relevance 10/10)
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Stainless Steel - Countersunk Head (Relevance 10/10)
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Steel (Relevance 10/10)
Metal Thread Screws UNC - UNF - BA - METRIC - Zinc Plated and Plain - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Steel - Countersunk Head (Relevance 10/10)
Flat Head Countersunk UNC - UNF - BA - METRIC - Plain and Zinc Plated - Various Head Types.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Titanium CP1 (Relevance 10/10)
Metal Thread Screws - Metric. CP Grade 1 Titanium.
Nuts sold seperately - See Nuts. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.
|
Screws - Machine - Titanium CP1 - Countersunk Head (Relevance 10/10)
Flat Head Countersunk. CP Grade 1 Titanium.
Nuts sold seperately - See Nuts. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.
|
Screws - Security - Post Combi Square - Pan Head - Super Zinc (Relevance 10/10)
Each 200 pack comes with a Post Combination Driver Bit
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Post Combi Square - Tools (Relevance 10/10)
Used for two hole security screws.
|
Screws - Security - Socket - Button (Relevance 10/10)
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Socket - Countersunk - Stainless Steel (Relevance 10/10)
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Socket - Countersunk - Zinc Plated (Relevance 10/10)
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Socket - Tools (Relevance 10/10)
Only available to users of the Socket Type Security Screws.
Used for hex socket security screws.
|
Screws - Security - Two Hole - Countersunk (Relevance 10/10)
Use special tool listed under Screws - Securty - Two Hole - Tools.
|
Screws - Security - Two Hole - Pan Head (Relevance 10/10)
Use special tool listed under Screws - Securty - Two Hole - Tools.
|
Screws - Security - Two Hole - Tools (Relevance 10/10)
Only available to users of the Two Hole Type Security Screws.
Used for two hole security screws.
|
Screws - Self Tapping - Countersunk Head (Relevance 10/10)
Countersunk screws length includes head. ie, the full overall length of the screw.
|
Screws - Self Tapping - For Plastics (Relevance 10/10)
Tri-Lobe Course Thread Plastic Threading Screws
Thread cutting screws for plastics Be sure to select correct screw for hard or soft plastic threadcutting
|
Screws - Self Tapping - Pan Head (Relevance 10/10)
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
|
Screws - Shoulder - Philips Head (Relevance 10/10)
Includes stainless steel and alloy steel
|
Screws - Shoulder - Slotted Head (Relevance 10/10)
Includes stainless steel and alloy steel
|
Screws - Shoulder - Socket Head (Relevance 10/10)
Includes stainless steel and alloy steel
|
Screws - Socket - Button - Alloy Steel (Relevance 10/10)
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Button - Aluminium (Relevance 10/10)
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.
|
Screws - Socket - Button - For Sheet Metal (Relevance 10/10)
Sheet metal screws
|
Screws - Socket - Button - Stainless Steel (Relevance 10/10)
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Button - Zinc Plated (Relevance 10/10)
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Cap - Alloy Steel (Relevance 10/10)
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Aluminium (Relevance 10/10)
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Molybdenum Disulphide Coated (Relevance 10/10)
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Nylon (Relevance 10/10)
UNC - UNF - METRIC - Non Conductive - Non Magnetic.
|
Screws - Socket - Cap - Stainless (Relevance 10/10)
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Titanium (Relevance 10/10)
METRIC. CP Grade 1.
CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Zinc Plated (Relevance 10/10)
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Countersunk - Aluminium (Relevance 10/10)
Flat Head Countersunk UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Countersunk - Stainless Steel (Relevance 10/10)
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Countersunk - Steel (Relevance 10/10)
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Low Head (Relevance 10/10)
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Tapered Head - Titanium (Relevance 10/10)
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Hot forged with rolled thread.
|
Screws - Thumb - Captive (Relevance 10/10)
Knurled Head.
|
Screws - Thumb - Dog Point (Relevance 10/10)
|
Screws - Thumb - Flat Point (Relevance 10/10)
|
Screws - Thumb - Half Turn (Relevance 10/10)
|
Screws - Thumb - Nylon Tip (Relevance 10/10)
|
Screws - Thumb - Plain (Relevance 10/10)
Brass, steel, aluminum and stainless and nylon.
|
Screws - Thumb - Quarter Turn (Relevance 10/10)
|
Screws - Thumb - Shoulder (Relevance 10/10)
Stainless Steel
|
Screws - Thumb - Washer (Relevance 10/10)
Brass, steel, aluminum and stainless.
|
Screws - Wood - Brass (Relevance 10/10)
Brass wood screws for models
|
Socket Set Screws - Acetal Tipped (Relevance 10/10)
Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
|
Socket Set Screws - Brass Tipped (Relevance 10/10)
Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.
|
Socket Set Screws - Cone Point (Relevance 10/10)
Cone point grub screws
|
Socket Set Screws - Cup Point - Standard (Relevance 10/10)
Standard grub screws. Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Socket Set Screws - Diamond Knurled Tip (Relevance 10/10)
Grub screws that grip rough shafts.
|
Socket Set Screws - Dog Point (Relevance 10/10)
Dog point grub screws
|
Socket Set Screws - Flat Ball Tip (Relevance 10/10)
Grub screws with a rotating flat tip. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip (Relevance 10/10)
Flat tip grub screws
|
Socket Set Screws - Half Dog Point (Relevance 10/10)
Half Dog Point grub screws
|
Socket Set Screws - Nylon Tipped (Relevance 10/10)
Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
|
Socket Set Screws - Rolling Ball Tip (Relevance 10/10)
Rolling ball tip for locating into a hole
|
Socket Set Screws - Solder Tipped (Relevance 10/10)
Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.
|
Handles and Knobs | |
Knobs - Thumb - For Cap Screws (Relevance 10/10)
Four Types and four colours to fit onto Socket Head Cap Screws.
To fit Socket Head Cap Screws (Order Separately - See link at base of listing below). Choice of 4 Colours. Choice of 4 styles. Made From Acetal Resin.
|
Knobs - Thumb - With Cap Screw (Relevance 10/10)
Four types and four colours.
Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.
|
Hobby Condensed Selection | |
Hobby Screws - Grub (Relevance 10/10)
A selection of popular sizes. Includes alloy steel and stainless steel. UNC - UNF - METRIC.
|
Linear Drive Systems | |
Actuators - Screw - Rotating - Screwjack - Size 10 and 14 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Rotating - Screwjack - Size 16 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Rotating - Screwjack - Size 19 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Rotating - Screwjack - Size 25 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Translating - Clevis End (Relevance 10/10)
Precision linear adjustment.
Material : Steel. Worm and Screw: Steel.
|
Actuators - Screw - Translating - Screwjack - Size 10 and 14 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Translating - Screwjack - Size 16 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Translating - Screwjack - Size 19 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Translating - Screwjack - Size 25 (Relevance 10/10)
Precision linear adjustment.
Body: Aluminium. Worm and Screw: Steel. Nut: Bronze.
|
Actuators - Screw - Translating - Top Plate (Relevance 10/10)
Precision linear adjustment.
Material : Steel.
|
Linear Drive Systems - Ballscrew | |
Screws - Ball - 16mm Diameter (Relevance 10/10)
16mm Diameter with pitches 2.5 to 20mm. Machined or unmachined ends. Nuts sold seperately.
Material : Cf53 induction hardened to HRC 62 (=/- 2). Pitch accuracy : <= 0.1mm / 300mm ISO class 7. Nuts sold seperately.
|
Screws - Ball - 16mm Housing - Base Type (Relevance 10/10)
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Housing - Flanged (Relevance 10/10)
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Bush Type (Relevance 10/10)
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Pillow Block (Relevance 10/10)
Includes ball nut.
Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.
|
Screws - Ball - Economy - Rolled - Nut Only (Relevance 10/10)
Match with screw. Accuracy T7 50µm/300mm.
Steel 16 MnCr5 or 100Cr6. Size, length of screw and end bearing configurations will affect the resulting loads and speeds. Backlash 0.01 Percent of lead. Accuracy T7 50µm/300mm. Blank sleeve supplied in nut to retain balls. Do not remove without simultaneous assembly to screw.
|
Screws - Ball - Economy - Rolled - Screw Only (Relevance 10/10)
Match with nut. Accuracy T7 50µm/300mm.
Longer lengths available on request (up to 5600mm). Steel Cf53 or Cf60 induction hardened and polished. Running trach hardened to 60 HRC. Profile: Gothic type rolled. Accuracy T7 50µm/300mm.
|
Screws - Ball - Precision - Miniature (Relevance 10/10)
Myonic precision ballscrew and nut assemblies.
Ground thread. Low starting and running torque. Backlash of only a few microns, optional zero backlash or preload of nuts.
|
Screws - Ball - Precision - Rolled (Relevance 10/10)
With pre-loaded (0.02CA) Nut (Cp5 23um/300mm).
All steel construction except end wipers in Nitrile Rubber. Single nut according to DIN 69051 (1989) with flange form B. Max. running temperature 80°C. Preload by ball selection (G0 pre-loaded) Fao = 0.02Ca. Precision accuracy Cp5 23µm/300mm ISO 3408-3.
|
Linear Drive Systems - Leadscrew | |
Actuator - Leadscrew - High Duty (Relevance 10/10)
VHD Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Aluminium. Shafts & Bearings: Hardened Steel. Weight: 12kg.
|
Actuator - Leadscrew - Light Duty (Relevance 10/10)
ZBX Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Anodised Aluminium. Shafts & Bearings: Hardened Steel. Weight: 1.3kg.
|
Actuator - Leadscrew - Low Profile (Relevance 10/10)
Lead = Travel per revolution of screw. Rail, Carriage Plate and End Blocks: Aluminium Carriage Blocks: Die cast Zinc. Leadscrew: Steel. Bearings: Self lubricating DryLin® Plastic. Max. Permissible Radial Load: 2,800N (Static), 2,000N (Dynamic). Max. Permissible Thrust Load: 700N (Static), 0,23 MPa x m/s (Dynamic Trapezoidal Leadscrew), 0.08 x m/s (Axial Bearing).
|
Actuator - Leadscrew - Medium Duty (Relevance 10/10)
ZBX Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Anodised Aluminium. Shafts & Bearings: Hardened Steel. Weight: 3kg.
|
Actuator - Leadscrew - Nuts (Relevance 10/10)
|
Leadscrew Assemblies - General Purpose (Relevance 10/10)
Nut: Self-lubricating Acetal / Leadscrew: 303 Stainless Steel with TFE extended life coating. Positional Repeatability: 0.0013mm. Lead Accuracy: 0.0006mm/mm. For applications not requiring anti-backlash and wear compensation. The secure mounting and convenience of a circular flange is standard on the B nuts.
|
Leadscrew Assemblies - High Backlash (Relevance 10/10)
Nut: Self-lubricating Acetal / Leadscrew: 303 Stainless Steel with TFE extended life coating. Positional Repeatability: 0.0013mm. Lead Accuracy: 0.0006mm/mm. Provides the maximum load carrying capacity and the highest axial and radial stiffness of any of our leadscrew assemblies. Designed for smooth, quiet operation and long life.
|
Leadscrew Assemblies - Precision - Anti-Backlash (Relevance 10/10)
Utilises a patented self-lubricating polyacetal nut radially preloaded on a 303 stainless screw.
Nut: Self-lubricating Acetal / Leadscrew: 303 Stainless Steel with TFE extended life coating. Positional Repeatability: 0.0013mm. Lead Accuracy: 0.0006mm/mm. Designed for operations requiring precise positional accuracy and repeatability. Ideally suited for vertical applications requiring noise or vibration control.
|
Leadscrew Nut Flanges for Acme Supernuts (Relevance 10/10)
Flanges for Acme leadscrew thread supernuts metric and imperial
MATERIAL - Aluminum 6062-T6 These flanges are screwed onto the outer thread of the red leadscrew nuts This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved
|
Leadscrew Nuts - Imperial - Supernuts - Acme (Relevance 10/10)
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
|
Leadscrew Nuts - Metric - Flanged - Bronze (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Bronze CuSn8P. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil. Manual or powered control - Low and medium rotational speeds - For working under load. 6 Mounting Holes On Flange
|
Leadscrew Nuts - Metric - Flanged - Plastic (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Iglidur W300. Single Start / Right Hand.
|
Leadscrew Nuts - Metric - Hexagonal - Metallic (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
|
Leadscrew Nuts - Metric - Round - Metallic (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
|
Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300 (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Iglidur W300 Plastic. Single Start / Right Hand.
|
Leadscrew Nuts - Metric - Round - Plastic - Nylon 6.6 (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Black Nylon 6.6. Wear Measured by Weight Reduction: 1.94wt.-%. Test Conditions: Load Direction: Horizontal Shaft Material: Stainless Steel Load: 10kg. Test Conditions: Speed: 300Rpm Cycles: 10,000 Stroke: 160mm Lubrication: None. Maintenance free. Support higher loads. Dry running. Dirt resistance.
|
Leadscrew Nuts - Metric - Square - Metallic (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
|
Leadscrew Nuts - Metric - Supernuts - Acme (Relevance 10/10)
Acme Leadscrew Nuts - Use with Acme Leadscrew Thread and flanges for mounting
|
Leadscrews - Imperial - Acme (Relevance 10/10)
Acme Leadscrew Thread - Use with Acme Supernuts
|
Leadscrews - Metric - Acme (Relevance 10/10)
Acme Leadscrew Thread - Use with Acme Supernuts
|
Leadscrews - Metric - Rolled Thread (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.
Carbon Steel C35E or Stainless steel 316L. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.
|
Leadscrews - Metric - Whirled Thread (Relevance 10/10)
Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.
Longer lengths may be available on request. Single Start. LRH: Steel 080 M40 (ck40) / LSRH: 303 Stainless Steel. Whirled screw left hand and right hand cut on same single piece of material to DIN103 Grade 7e. Use with Trapezoidal Nuts.
|
Tools | |
Tools - Screw Extractors (Relevance 10/10)
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor.
|
Unsorted | |
Hitech Unsorted Screws (Relevance 10/10)
Unsorted Hitech Screws
|
Linear Drive Systems - Ballscrew | |
Supports - Ballscrew - Rigid (Relevance 4/10)
Incorporates Angular Contact Bearings.
Material: Steel. Complete with: Bearings, Locknut, Seals and Bearing Spacer.
|
Supports - Ballscrew - Simple (Relevance 4/10)
Incorporates Radial Ball Bearings.
Material : Steel. Comes complete with bearing and circlip.
|
Tools | |
Tools - Screwdrivers (Relevance 4/10)
A range of micro screwdrivers and ball end allen keys
|
Clamping and Locking | |
Hubs - Bolt On (Relevance 3/10)
Aluminium Hub with Set Screws
|
Fasteners | |
Pins - Hammer Drive - Flat Head (Relevance 3/10)
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
|
Pins - Hammer Drive - Round Head (Relevance 3/10)
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
|
Handles and Knobs | |
Knob Kits - Assorted (Relevance 3/10)
Sets of knobs for use with socket head cap screws.
Each kit contains an assortment of knobs (see contents list). Supplied in a plastic case.
|
Knobs - Oval Tapered - Press On - Phenolic (Relevance 3/10)
Press on knobs hold on securely without threads or set screws
Shaft diameter should be +0.000 / - 0.076 mm for best performance Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.
|
Knobs - Pointer - Aluminium and Plastic (Relevance 3/10)
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass Insert. White Pointer.
|
Knobs - Pointer - Black Aluminium (Relevance 3/10)
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft.
|
Knobs - Pointer - Skirted (Relevance 3/10)
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.
|
Knobs - Pointer - Skirted - Numbered (Relevance 3/10)
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.
|
Knobs - Precision - Knurled (Relevance 3/10)
Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.
303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).
|
Kits | |
Assortment Kits - Various (Relevance 3/10)
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
|
Storage | |
Ties - Cable - Mounting Holes (Relevance 3/10)
Cable ties with screw mounting holes.
|
Tools | |
Tools - Thread Repair (Relevance 3/10)
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
|
Washers | |
Washers - Cup - Aluminium (Relevance 3/10)
For countersunk screws.
Aluminium solid cup washers.
|
Washers - Cup - Brass (Relevance 3/10)
For countersunk screws.
Nickel Plated Brass.
|
Washers - Cup - Stainless Steel (Relevance 3/10)
For countersunk screws.
Stainless Steel cup washers.
|
Clamping and Locking | |
Assemblies - Locking - Flanged (Relevance 1/10)
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
|
Assemblies - Locking - Unflanged (Relevance 1/10)
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
|
Clamps - Syncro - Mounting - Sintered (Relevance 1/10)
Sintered Stainless Steel 316. Screw Treat Per MIL-S-5002, Clamp as cast and tumbled. Insert - Nylon Type 1 per MIL-M20693, Natural Colour.
|
Collars - Shaft - Hinged Type (Relevance 1/10)
Precision machined. Convenient easy-to-assemble design.
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
|
Hubs - Gear and Dial - Double (Relevance 1/10)
Set screw mounting.
|
|
