Tape Double Sided - Hobby And Engineering Parts

Categories that include the terms: TAPE and DOUBLE and SIDED Hobby Accessories Tape - Double Sided (Relevance 10/10) Double Sided Foam Tape Tape - Glass Fibre (Relevance 5/10) Hinge tape and other uses Belt and Sprockets - Posi-Drive Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core (Relevance 4/10) Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets. Use Double Core with Posi-Drive Sprockets. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core (Relevance 4/10) Same as US 20 Pitch - Use with Posi-Drive Sprockets. Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined Couplings Couplings - Double Disk (Relevance 4/10) Zero Backlash - High Torsional Stiffness. Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm. Couplings - Double Disk - High Torque (Relevance 4/10) Zero Backlash - Clamp Locking - Medium torsional stiffness. High torsional stiffness and high response. Zero backlash. Hub: Aluminium (A2017) Spacer: Aluminium (A2011). Pin: Stainless Steel (SUS301) Disk: Stainless Steel (SUS303). Maximum Temperature: +100°C. 2.8 to 22 Nm. 2400 to 4800 rpm. Identical clockwise & anti-clockwise rotational characteristics. Fasteners Pins - Wire Lock Lynch - Double Wire - Round (Relevance 4/10) Model Kit Accessories Model Kit Masking Tape (Relevance 4/10) Various sizes Mounts and Vibration Control Dampeners - Double Studded - Silicone (Relevance 4/10) Damps low frequency vibrations. Use for compression only. Retaining Rings and Clips R-Clips - Double Coil (Relevance 4/10) Also known as internal hitch pins, bridge pins or humpback pins Bearings - Specialty Bearings - Automotive - Tapered Roller (Relevance 3/10) Fasteners Pins - Taper - Imperial - Miniature (Relevance 3/10) Imperial Sizes 1:48 Taper (1/4 in. per foot). Miniature sizes. Stainless and Mild Steel. Pins - Taper - Imperial - Standard (Relevance 3/10) Imperial Sizes 1:48 Taper (1/4 in. per foot). Standard sizes numbers 0 to 14. Stainless and Mild Steel. Pins - Taper - Metric (Relevance 3/10) Metric Sizes 1:50 Taper Metric Sizes to DIN 1. Pins - Taper - Metric - Extractable - Internal Thread (Relevance 3/10) 1:50 Taper. DIN 7978. Mild Steel. Handles and Knobs Knobs - Oval Tapered - Press On - Phenolic (Relevance 3/10) Press on knobs hold on securely without threads or set screws Shaft diameter should be +0.000 / - 0.076 mm for best performance Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside. Bearings and Housings Housings - Bearing - Pillow Block - Miniature (Relevance 1/10) Aluminium pillow block housings mounted with 440C stainless miniature bearings No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings Double shielded bearings to minimise contamination Belt and Sprockets - Posi-Drive Sprockets - Posi-Drive - 3.75 mm Circular Pitch (Relevance 1/10) Same as US 0.1475 Pitch - Use with Double Core Belts. Use with Double Core Posi-Drive Belts. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Sprockets - Posi-Drive - 4.00 mm Circular Pitch (Relevance 1/10) Same as US 20 Pitch - Use with Double Core Belts. Use with Double Core Posi-Drive Belts. 3.990mm Circular Pitch. Same as US 20 Pitch. Games Games - Strategy (Relevance 1/10) Strategy Games including Wooden and other games. Ideal gifts for thinking people. Gobblet on the Go - Ringgz - Double Shutter - Eye of Horus - Khet - Tower of Kadesh - Giza - Dividends Jumping Java - Logan Stones - Hive - Army of Frogs - Quarto - Quixo - Quoridor - Batik - Pylos Skybridge - Inside - Eclipse - Gipf - Zertz - Dvonn - Yinsh - Punct - Tamsk - Abalone - Pentago - Columns Trinidad - Fire and Ice - Cityscape - Poison Pot - Zaroc - Megalith - Tantrix - Yikers Hinges Hinges - Flexi-Hinge - Precision (Relevance 1/10) Double and Single Ended - Limited Angle Rotary Applications. Zero Backlash. Constant Spring Rate. No lubrication required. Self centering on removal of load. -53 to +176 Deg. Celsius operating temperature. Hobby Accessories Dubro Accessories Listed by Description (Relevance 1/10) Accessories for model airplanes and other hobbies. Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings, Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns, Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws, Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders, Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable. Retaining Rings and Clips Spiral Rings - External - Heavy Duty (Relevance 1/10) AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel. Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2 Spiral Rings - Internal - Heavy Duty (Relevance 1/10) Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel. Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2 Storage Parts Boxes - Tilt Type (Relevance 1/10) Tilt pak plastic carry box with 4 self locking drawers Can be joined togetherto make a double sided case Freestanding or mountable 4 self locking drawers each with 4 compartments Universal Joints Covers - Universal Joint - Elasticate Rubber (Relevance 1/10) For Single and Double Universal Joints. -27 Deg C to 70 Deg C temp range (constant). -32 Deg C to 120 Deg C temp range (intermittent). Worms and Worm Gears Worm Gears - 24 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.77 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 24 Pitch (Series 1) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.77 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 24 Pitch (Series 2) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 9.47 Degree Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 32 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.08 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 32 Pitch (Series 1) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.08 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 32 Pitch (Series 2) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 8.13 Degree Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 32 Pitch (Series 3) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 25 Degree Pressure Angle - 15.95 Degree Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 48 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 3.35 Degree Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 48 Pitch (Series 2) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.08 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 48 Pitch (Series 6) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 25 Degree Pressure Angle - 14.2 Degree Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - 64 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 1.78 Degree Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 0.5 (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.18 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm (Relevance 1/10) Match with metallic worms Module 0.80 Series 2. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.58 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.58 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.87 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 24 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.77 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 24 Pitch (Series 1) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.77 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 24 Pitch (Series 2) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 9.47 Degree Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 32 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.08 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 32 Pitch (Series 1) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 4.08 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 32 Pitch (Series 2) - Plastic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 8.13 Degree Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 32 Pitch (Series 3) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 25 Degree Pressure Angle - 15.95 Degree Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 48 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 3.35 Degree Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 48 Pitch (Series 5) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 25 Degree Pressure Angle - 14.2 Degree Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - 64 Pitch (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 14.5 Degree Pressure Angle - 1.78 Degree Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 0.5 (Series 1) - Metallic (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.18 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm (Relevance 1/10) Match with metallic worms Module 0.80 Series 2. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 1 (Series 1) - Plastic and Metallic - Right Hand (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.58 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 1 (Series 2) - Plastic Gear and Metallic Worm (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 2 (Series 4) - Plastic Gear and Metallic Worm (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 4.40 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Worms - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand (Relevance 1/10) Worms and Gears must be chosen from the same pitch and series to match. 20 Degree Pressure Angle - 3.87 Degree Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear. Too many choices? You have selected to see ALL categories containing the terms TAPE AND DOUBLE AND SIDED. Click here to see ONLY THE MOST POPULAR categories containing the terms TAPE AND DOUBLE AND SIDED.

Cart total A$ 0.00 You may need to refresh the page if your selected currency doesn't change. Currency Options Default (USD) British Pound Canadian Dollar Euro Hong Kong Dollar Japanese Yen New Zealand Dollar Singapore Dollar US Dollar Swiss Francs You may need to refresh the page if your selected currency doesn't change. Item Popularity Show only popular categories Pictures Hide pictures Show all categories starting with A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 Major Categories Adaptors Adhesives Aircraft Aircraft Parts Ansmann Parts Axial Parts Balls Bar Batteries Bearings Belts Bikes (Models) Boats Books (Hobby) Bushes Carbon Fibre Cars - Buggies - Truggies Car Parts Castors Ceramic Chain Circlips Clamps Collars Colt Parts Couplings Cranks Dental Bearings and Parts Dowel Pins Dragon Hobby Parts Drylin Dual Vee Dubro Parts DVD's (Hobby) Educational Products E-Flite Parts E-Sky Parts Engines Engine Parts Fishing Reel Bearings Fuel Games Gas Springs Gearboxes Gearmotors Gears Great Vigor Parts Handles Hangar 9 Parts Helicopters Helicopter Bearings Helicopter Parts Housings Hubs Joints Keysteel Knobs Kyosho Parts Lazy Susans Leadscrews Levers Linear Bearings Losi Parts Lubricants Materials Model Kits and Accessories Motors Mounts Mousetrap Vehicles MVVS Engine Parts Multiplex Parts Nuts O-Rings Oil Seals OS Engine Parts Paint Parkzone Parts Parts Boxes Pins Planes Plane Parts Pulleys Ratchets Reducers Rod Rod Ends Rollers Saito Parts Screws Shafting Sheet Shim Slides Solarbotics Solar Cells Spacers Sportwerks Parts Springs Sprockets Steam Boats and Engines Super Tigre Parts Surplus Specials Suspension Units Tamiya Parts Threaded Rod Tools Tube Universal Joints Venom Parts Vibration Mounts Washers Wheels Worms Zenoah Engine Parts SEARCH Product Description (Category) Information Search Part Number (ours) Part Number (other) Guided Search CATALOGUES Catalogues Index Catalogue A-Z Online Catalogues A-Z PDF Discount Registration Online Catalogue Quick Guides Surplus Stock   Adhesives Aircraft Aircraft Parts Ansmann Parts Axial Parts Bar Batteries Bearings Bikes (Models) Boats Books (Hobby) Carbon Fibre Cars - Buggies - Truggies Car Parts Ceramic Colt Parts Couplings Dental Bearings and Parts Dragon Hobby Parts Dubro Parts DVD's (Hobby) E-Flite Parts E-Sky Parts Engines Engine Parts Fishing Reel Bearings Fuel Games Gears Great Vigor Parts Hangar 9 Parts Helicopters Helicopter Bearings Helicopter Parts Hobbyzone Parts Kyosho Parts Losi Parts Materials Model Kits and Accessories Motors Mousetrap Vehicles Multiplex Parts MVVS Engine Parts OS Engine Parts Paint Parkzone Parts Parts Boxes PDF A-Z All Categories Planes Plane Parts Products Not Listed Here Saito Parts Screws Solar Cells Solarbotics Sportwerks Parts Steam Boats and Engines Super Tigre Parts Surplus Stock Specials Tamiya Parts Tools Tube Venom Parts Zenoah Engine Parts   Products Not Listed Above Quick Guides HOW TO & ABOUT US Charity Contact Us Frequently Asked Questions Freight Rates Home How To Order Online Mailorder Newsletter Subscription Order Specially Quoted Parts Payment Options Terms and Conditions of Sale PRODUCT INFORMATION Dental Bearings Hobby Information Information Sheets New Products Surplus Specials Lists Technical Information RECOMMENDED LINKS ACMA Radio Frequencies ACMA Frequencies Class License Couplings Information eParcel Tracking Express International Tracking Gearboxes Information Jokes and Trivia Materials Information Miniature Bearings Australia Ondrives UK Rino UK Shafting Information Shafting Information Stainless Selection Tingalpa Model Aero Club TNT Freight Tracking Unfair Contracts Wikipedia Windows to The Universe World Time

• Search for information pages instead of products
• Mail Order Form
• Order non-standard parts quoted by e-mail
• Freight Rates
• Terms of Sale

All care has been taken in the compilation of this page, however errors may occur. Please do not use the information contained herein for critical applications without first re-checking the information with an independent source. No responsibility will be accepted by Hobby & Engineering Supplies Pty Ltd or the Directors of said company for any loss of any kind that may be incurred in any way whatsoever from use of the information provided in these pages.

***** Trademarks *****

Delrin^TM is a registered trademark of duPont Corporation
Teflon^TM is a registered trademark of duPont Corporation

HES Terms and Conditions of Sale

HES Privacy Policy