THE RIGHT MIX OF BUSINESS AND PLEASURE
Click here for OTHER SEARCHES
316 - Precision - Technical Information - Hobby and Engineering
Precision - 316 Stainless Steel Bearings
This table covers tolerances for bearings made from 316 Stainless Steel
Note! 316 Stainless Steel is not a standard bearing steel and is less precise and softer than standard bearing stainless steel.
Dimensions are in 0.001 mm (thousandths of a mm)
1 mm = 0.03937 of an inch. 1 micron (um)
= 0.00003937 of an inch
To obtain the tolerance in inches multiply the figure shown by 0.00003937
eg. 76.2 um x 0.0000397 = 0.002999994 inches (about 3 thou.)
| Bearing Size | Tolerance in um |
|---|---|
| Bore <= 19.050 mm | 0.000 / +76.200 |
| Bore > 19.050 mm | 0.000 / +101.600 |
| OD <= 25.400 mm | -76.200 / 0.000 |
| OD > 25.400 and <= 41.275 | -101.600 / 0.000 |
| OD > 41.275 and <= 50.800 | -127.000 / 0.000 |
| OD > 50.800 | -152.400 / 0.000 |
| Width | 0.000 / +127.000 |
Log in and start browsing the HES Online Store.
Tables and information on this web site should be read as a general guide only. The relevant standards should be consulted to ensure the accuracy of information presented.
There are no further parts to this document.
Site Summary:
Terms and Conditions
Privacy Policy
Using the links at the top of this page you will find extensive information including catalogues (Products and Store link), technical data, and other product specific information.
We also suggest that you may want to take a look at the technical information sites - Shafting Information, Couplings Information and Gearboxes Information.
© Copyright Hobby and Engineering Supplies Pty Ltd 2008. All rights reserved.