Couplings Other Categories
Couplings - Eccentric Drive
1.88mm bore press fits most standard hobby motors (2mm shaft)
There is also a good range of Couplings - Eccentric Drive on the Small Parts and Bearings website.
You may also be interested in
Dubro Accessories
Dubro Accessories Listed by Description
Accessories for model airplanes and other hobbies.
Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.
There is also a good range of Dubro Accessories Listed by Description on the Small Parts and Bearings website.
Couplings - Helical - Economy
Low cost aluminium couplings primarily used for 3D printer stepper motors
Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.
Related Information:
There is also a good range of Couplings - Helical - Economy on the Small Parts and Bearings website.
Couplings - Rigid - Hobby - Brass
A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.
Related Information:
There is also a good range of Couplings - Rigid - Hobby - Brass on the Small Parts and Bearings website.
465LRN Coupling Kavo Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of 465LRN Coupling Kavo Parts on the Small Parts and Bearings website.
Shafting - Ground - Hobby - Steel
Silversteel shafting for hobbies. Not suitable for precision bearings.
Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.
Related Information:
There is also a good range of Shafting - Ground - Hobby - Steel on the Small Parts and Bearings website.
Gearmotors - Basic - Hobby - 12.1mm Diameter
Small light weight geared motors used in toys and small solar applications
NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.
There is also a good range of Gearmotors - Basic - Hobby - 12.1mm Diameter on the Small Parts and Bearings website.
All Other Rear Exhaust - 21 Force Parts
Bearings and Spare Parts for Remote Control Models
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
All Other Rear Exhaust - 61 Force Parts
Bearings and Spare Parts for Remote Control Models
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bungs - Rectangular
Plastic bungs fit inside rectangular tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Rectangular on the Small Parts and Bearings website.
Bungs - Round
Plastic bungs fit inside round tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Round on the Small Parts and Bearings website.
Bungs - Square
Plastic bungs fit inside square tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Square on the Small Parts and Bearings website.
Tips - Round
Plastic tips fit over outside of tubing.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.
There is also a good range of Tips - Round on the Small Parts and Bearings website.
Wheels - Robotic - Motorised
Motorised wheels for robotic and other applications
See also tracks for robotic applications.
There is also a good range of Wheels - Robotic - Motorised on the Small Parts and Bearings website.
Screws - Button - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Cap - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Aluminium on the Small Parts and Bearings website.
Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nylon Insert for Locking. NylocTM and other brands.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Nylon Insert - Stainless Steel on the Small Parts and Bearings website.
Bearings for Pool Equipment
Acetal bearings for spa jets and pool vacuum wheels
No lubrication required other than the water they are running in.
Related Information:
There is also a good range of Bearings for Pool Equipment on the Small Parts and Bearings website.
RC Spare Parts - Hobby Pro
Hobby Pro spare parts listed by description. Suits Mutilator, Matador, H5 and H6 and other 1/5th Scale Petrol Cars
There is also a good range of RC Spare Parts - Hobby Pro on the Small Parts and Bearings website.
Lanyards - Nylon
One piece moulded retainer designed for light duty retention.
Customer assembled loop is designed to be used with press lock rivets or other fasteners. Nylon 6/6 in UV stabilised black.
There is also a good range of Lanyards - Nylon on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Parts Boxes - Tins
Parts tins. Great for kids and adults alike. Store your small valuables.
Classic small storage tins with a beautiful picture. Store game pieces, jewellery, cards and other small items.
There is also a good range of Parts Boxes - Tins on the Small Parts and Bearings website.
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Parts Boxes - Clear Plastic
Plastics clear compartmented parts boxes with flip lids.
Plastic hinged lid. Quality catch to secure contents. Ideal for storing small parts. Includes Fischer brand and others. Also includes a small membrane box for displaying small items like coins or jewellery.
There is also a good range of Parts Boxes - Clear Plastic on the Small Parts and Bearings website.
Bearings - Ball - Anti Corrosion - Special Stainless
Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C
Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request.
Related Information:
There is also a good range of Bearings - Ball - Anti Corrosion - Special Stainless on the Small Parts and Bearings website.
Inserts - Expansion - Press In - Brass
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.
There is also a good range of Inserts - Expansion - Press In - Brass on the Small Parts and Bearings website.
Inserts - Expansion - Press In - Brass - Flanged
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.
There is also a good range of Inserts - Expansion - Press In - Brass - Flanged on the Small Parts and Bearings website.
Tube - Round - Acrylic
Acrylic Transparent Tube
Acrylic also called Poly Methyl Methacrylate (PMMA) is a transparent thermoplastic often used as light weight or shatter-resistant alternatives to glass. Acrylic is an economical alternative to polycarbonate when extreme strength is not necessary. Additionally, doesn't contain potentially harmful bisphenol-A subunits. Often preferred because of moderate properties, easy handling and processing and low cost. Acrylic in the form off tubes affords hatter resistant panels for making rotating shafts, spacers, display and many other applications. Please note this item is not a precision item. The inside diameter is not toleranced and may vary between batches.
There is also a good range of Tube - Round - Acrylic on the Small Parts and Bearings website.
Sheet - Acrylic
Acrylic Sheeting. Clear and coloured perspex sheets in a variety of thicknesses.
Acrylic also called Poly Methyl Methacrylate (PMMA) is a transparent thermoplastic often used as light weight or shatter-resistant alternatives to glass. Acrylic is an economical alternative to polycarbonate when extreme strength is not necessary. Additionally, doesn't contain potentially harmful bisphenol-A subunits. Often preferred because of moderate properties, easy handling and processing and low cost. Acrylic in sheet form affords shatter resistant panels for building windows, skylights, bulletproof security barriers, signs and displays and many other applications. In Robotics it is often laser cut into shapes off base boards or motor speed detecting code discs.
There is also a good range of Sheet - Acrylic on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)
Hobby and Engineering Supplies offers 6298 products in 332 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.
Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.
