Hobby & Engineering Supplies - an MBA company

EZ200 REID


Cross Referenced Part Numbers



IN-EP-0152F-032-B Reid part number EZ-200



Internal Thread: 0-80 UNF (1.524mm). Pilot Diameter (A): 2.36. Length (L): 3.175.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Fishing Reel Parts


Curado 200 Shimano Parts
Curado 200 Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Curado 200 Shimano Parts on the Small Parts and Bearings website.


Dental Handpiece Parts


Top Air 200 Series W.H. Parts
Top Air 200 Series W.H. Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Top Air 200 Series W.H. Parts on the Small Parts and Bearings website.


You may also be interested in

Thread Inserts


Inserts - Thread Repair - Recoil Starter Sets
Inserts - Thread Repair - Recoil Starter Sets

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.


2000 10 Port - 15 Nova Rossi Parts
2000 10 Port - 15 Nova Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


2000 10 Port - 21 3.5CC Nova Rossi Parts
2000 10 Port - 21 3.5CC Nova Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


2000 10 Port - 21 Nova Rossi Parts
2000 10 Port - 21 Nova Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Symetre 2000 Shimano Parts
Symetre 2000 Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Symetre 2000 Shimano Parts on the Small Parts and Bearings website.


Triton 200G Shimano Parts
Triton 200G Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Triton 200G Shimano Parts on the Small Parts and Bearings website.


Cat 2000 Schumaker Parts
Cat 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Cat 2000 SE Schumaker Parts
Cat 2000 SE Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Cougar 2000 1995 Team Car Schumaker Parts
Cougar 2000 1995 Team Car Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Cougar 2000 Schumaker Parts
Cougar 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Evolva 2005 Kyosho Parts
Evolva 2005 Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Fantom 2001 Kyosho Parts
Fantom 2001 Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Laser 2000 EP 4 WD Kyosho Parts
Laser 2000 EP 4 WD Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


SST 2000 '98 Schumaker Parts
SST 2000 '98 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


SST 2000 '99 Schumaker Parts
SST 2000 '99 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


SST 2000 Pro Schumaker Parts
SST 2000 Pro Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


SST 2000 Pro With Steering Schumaker Parts
SST 2000 Pro With  Steering Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


SST 2000 Schumaker Parts
SST 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Cat 1998 - 2000 Schumaker Parts
Cat 1998 - 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Fire Blade 2000 Schumaker Parts
Fire Blade 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Storm Truck 2000 Schumaker Parts
Storm Truck 2000 Schumaker Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Vector Spec 2000 Serpent Parts
Vector Spec 2000 Serpent Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Wild Willy 2000 Tamiya Parts
Wild Willy 2000 Tamiya Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BR21SB01 Rex - 2000 Nova Rossi Parts
BR21SB01 Rex - 2000 Nova Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BS21SB Nova - 2000 Nova Rossi Parts
BS21SB Nova - 2000 Nova Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Impact M2 Spec 2000 4WD Bearings Serpent Parts
Impact M2 Spec 2000 4WD Bearings Serpent Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Merceded CLK - DTM AMG 2002 Tamiya Parts
Merceded CLK - DTM AMG 2002 Tamiya Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


C200 T1 Sirona Parts
C200 T1 Sirona Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of C200 T1 Sirona Parts on the Small Parts and Bearings website.


AR2000 Daiwa Parts
AR2000 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of AR2000 Daiwa Parts on the Small Parts and Bearings website.


TR2000 LD Shimano Parts
TR2000 LD Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of TR2000 LD Shimano Parts on the Small Parts and Bearings website.


LB2000 MIP Trans Parts
LB2000 MIP Trans Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


RS200 Ford Kyosho Parts
RS200 Ford Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


EVO2000 - 35 CMB Parts
EVO2000 - 35 CMB Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


S2000 RC 1.2 C.I Super Tigre Parts
S2000 RC 1.2 C.I Super Tigre Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


S2000 RC - 61 Super Tigre Parts
S2000 RC - 61 Super Tigre Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


S2000 RC - 75 Super Tigre Parts
S2000 RC - 75 Super Tigre Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Shimano External BB Pre 2006 Parts
Check Size Before Ordering Shimano External BB Pre 2006 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Shimano External BB Pre 2006 Parts on the Small Parts and Bearings website.


Drill 8-12000 RPM Bravo Bedetrice Parts
Drill 8-12000 RPM Bravo Bedetrice Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Drill 8-12000 RPM Bravo Bedetrice Parts on the Small Parts and Bearings website.


S 12000 RPM Sirona Parts
S 12000 RPM Sirona Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of S 12000 RPM Sirona Parts on the Small Parts and Bearings website.


Calais CL200 - CL200-5 Shimano Parts
Calais CL200 - CL200-5 Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Calais CL200 - CL200-5 Shimano Parts on the Small Parts and Bearings website.


HARM SX3-2005 Bearings Losi Parts
HARM SX3-2005 Bearings Losi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


LB1000 - LB2000 - LB3000 Mip Trans Parts
LB1000 - LB2000 - LB3000 Mip Trans Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Calcutta 50-100-150-200-250-251-400-600 Shimano Parts
Calcutta 50-100-150-200-250-251-400-600 Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Calcutta 50-100-150-200-250-251-400-600 Shimano Parts on the Small Parts and Bearings website.


Blade CX3 MD 520N EFLH2000 E-Flite Parts
Blade CX3 MD 520N EFLH2000 E-Flite Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


FHX Force Battle MH-35 Heli FCE2000AU1 Force Parts
FHX Force Battle MH-35 Heli FCE2000AU1 Force Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Subaru Imprezza Kyosho Parts
Subaru Imprezza Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Subaru Imprezza Tamiya Parts
Subaru Imprezza Tamiya Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Tools - Tweezers
Tools - Tweezers

Also see combined categories:
All Tools

Selection of tweezers for those fiddly jobs.


There is also a good range of Tools - Tweezers on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6219 products in 445 categories including assortment kits, low priced hobby bearings, tools, screws, brass and aluminium rod and tubing - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6219 products in 445 categories including assortment kits, low priced hobby bearings, tools, screws, brass and aluminium rod and tubing - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.