Hobby & Engineering Supplies - an MBA company

Rod Round Aluminium Categories


Engineering and Hobby Rod


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

There is also a good range of Rod - Round - Soft Metal Packs on the Small Parts and Bearings website.


You may also be interested in

Spacers


Spacers - Round - Through Bore - Aluminium
Spacers - Round - Through Bore - Aluminium

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Aluminium


There is also a good range of Spacers - Round - Through Bore - Aluminium on the Small Parts and Bearings website.


Tube and Tubing


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Aluminium on the Small Parts and Bearings website.


Tube - Round - Soft Metal Packs
Tube - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths for general hobby applications. Includes K&S Metals range and more. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.

There is also a good range of Tube - Round - Soft Metal Packs on the Small Parts and Bearings website.


Bar and Rod


Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.

There is also a good range of Rectangular Bar - Aluminium on the Small Parts and Bearings website.


Sheet Metallic


Sheet - Aluminium - T1100
Sheet - Aluminium - T1100

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.

There is also a good range of Sheet - Aluminium - T1100 on the Small Parts and Bearings website.


Sheet - Aluminium - T7075
Sheet - Aluminium - T7075

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.

There is also a good range of Sheet - Aluminium - T7075 on the Small Parts and Bearings website.


Thread Inserts


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.


Washers Finishing


Washers - Cup - Aluminium
Washers - Cup - Aluminium

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers.

There is also a good range of Washers - Cup - Aluminium on the Small Parts and Bearings website.


Washers Flat Metallic


Washers - Flat - Aluminium
Washers - Flat - Aluminium

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.


Related Information:

There is also a good range of Washers - Flat - Aluminium on the Small Parts and Bearings website.


Tube and Tubing


Tube - Square - Aluminium
Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more.

Related Information:

There is also a good range of Tube - Square - Aluminium on the Small Parts and Bearings website.


Tube - Streamline - Aluminium
Tube - Streamline - Aluminium

Also see combined categories:
All Metal Tube

Streamline Aluminium Tubing.

Teardrop shaped soft aluminium tubing. Enables easier bending. Great for tight applications. Includes K&S Metals range and more.

Related Information:

There is also a good range of Tube - Streamline - Aluminium on the Small Parts and Bearings website.


Screws Button Head


Screws - Button - Socket - Aluminium
Screws - Button - Socket - Aluminium

Also see combined categories:
All Machine Screws
All Socket Button Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.

Related Information:

There is also a good range of Screws - Button - Socket - Aluminium on the Small Parts and Bearings website.


Screws Cap Head


Screws - Cap - Socket - Aluminium
Screws - Cap - Socket - Aluminium

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.

Related Information:

There is also a good range of Screws - Cap - Socket - Aluminium on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Socket - Aluminium
Screws - Countersunk - Socket - Aluminium

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.


Shim


Shim and Foil - Aluminium
Shim and Foil - Aluminium

Also see combined categories:
All Shim
All Sheet

Precision aluminium shim sheet. Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Coloured shim is anodised. The colour is not removable. The colour is for identification purposes only. Includes K&S Metals range and more.

There is also a good range of Shim and Foil - Aluminium on the Small Parts and Bearings website.


Nuts Lock


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:

There is also a good range of Nuts - Hexagonal - Nylon Insert - Aluminium on the Small Parts and Bearings website.


Bearings Housings


Housings - Bearing - Pillow Block - Miniature
Housings - Bearing - Pillow Block - Miniature


Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Related Information:

There is also a good range of Housings - Bearing - Pillow Block - Miniature on the Small Parts and Bearings website.


Couplings - Helical - Economy
Couplings - Helical - Economy

Also see combined categories:
All Helical and Slit Couplings

Low cost aluminium couplings primarily used for 3D printer stepper motors

Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Related Information:

There is also a good range of Couplings - Helical - Economy on the Small Parts and Bearings website.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.


Rod - Round - Acetal
Rod - Round - Acetal

Also see combined categories:
All Plastic Rod

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - Acetal on the Small Parts and Bearings website.


Rod - Round - Nylon
Rod - Round - Nylon

Also see combined categories:
All Plastic Rod

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - Nylon on the Small Parts and Bearings website.


Rod - Round - Polyester PETP
Rod - Round - Polyester PETP

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - Polyester PETP on the Small Parts and Bearings website.


Rod - Round - PTFE
Rod - Round - PTFE

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - PTFE on the Small Parts and Bearings website.


Rod - Round - Urethane
Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent.

Related Information:

There is also a good range of Rod - Round - Urethane on the Small Parts and Bearings website.


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round


Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:

There is also a good range of Bungs and Caps - Reversible - Round on the Small Parts and Bearings website.


Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.

Related Information:

There is also a good range of Tube - Round - Stainless Steel on the Small Parts and Bearings website.


Tube - Round - Brass
Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Brass on the Small Parts and Bearings website.


Tube - Round - Copper
Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Copper on the Small Parts and Bearings website.


Tube - Round - Acrylic
Tube - Round - Acrylic

Also see combined categories:
All Non Metallic Tube - Round

Acrylic Transparent Tube

Acrylic also called Poly Methyl Methacrylate (PMMA) is a transparent thermoplastic often used as light weight or shatter-resistant alternatives to glass. Acrylic is an economical alternative to polycarbonate when extreme strength is not necessary. Additionally, doesn't contain potentially harmful bisphenol-A subunits. Often preferred because of moderate properties, easy handling and processing and low cost. Acrylic in the form off tubes affords hatter resistant panels for making rotating shafts, spacers, display and many other applications. Please note this item is not a precision item. The inside diameter is not toleranced and may vary between batches.

There is also a good range of Tube - Round - Acrylic on the Small Parts and Bearings website.


Tools - Die Holders
Tools - Die Holders

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.


There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.


Screws - Round Head - Brass - Slotted
Screws - Round Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BSW - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.


Spacers - Round - Hobby
Spacers - Round - Hobby

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications


There is also a good range of Spacers - Round - Hobby on the Small Parts and Bearings website.


Bungs - Round
Bungs - Round


Plastic bungs fit inside round tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Related Information:

There is also a good range of Bungs - Round on the Small Parts and Bearings website.


Tips - Round
Tips - Round


Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.

There is also a good range of Tips - Round on the Small Parts and Bearings website.


Tube - Round - Carbon Fibre
Tube - Round - Carbon Fibre

Also see combined categories:
All Non Metallic Tube - Round

High impact light weight carbon fibre hollow tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

There is also a good range of Tube - Round - Carbon Fibre on the Small Parts and Bearings website.


Switches - Rocker
Switches - Rocker

Also see combined categories:
All Switches

20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.

Switchs are rated at 10amp @ 600VAC with finger safe screw terminals.

There is also a good range of Switches - Rocker on the Small Parts and Bearings website.


Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Pan Head - 303-304 Stainless - Philips on the Small Parts and Bearings website.


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.


Rod - Drill - Silversteel - W-1 Water Hardening
Rod - Drill - Silversteel  - W-1 Water Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for W-1 hardening requirements.

There is also a good range of Rod - Drill - Silversteel - W-1 Water Hardening on the Small Parts and Bearings website.


Bar - H Section - Brass
Bar - H Section - Brass

Also see combined categories:
All Metal Bar - H Section (300mm Long Only)

Includes K&S Metals range and more


There is also a good range of Bar - H Section - Brass on the Small Parts and Bearings website.


Square Bar - Brass
Square Bar - Brass

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

There is also a good range of Square Bar - Brass on the Small Parts and Bearings website.


Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.


Related Information:

There is also a good range of Threaded Rod - Unthreaded Centre - Steel on the Small Parts and Bearings website.


Joints - Tee - Tubing and Rod
Joints - Tee - Tubing and Rod


Inexpensive nylon joiners for hobby tubing and rod


There is also a good range of Joints - Tee - Tubing and Rod on the Small Parts and Bearings website.


Engine Parts - OS
Engine Parts - OS

Also see combined categories:
All Engine Parts

Carburettors - Connecting Rods - Cover Plates - Crankcases - Crankshafts - Cylinders - Gaskets - Heatsink - O-Rings - Pins - Pistons - Screws - Valves and more

Use this list in conjunction with your spare parts manual to ensure you are ordering the correct parts.

There is also a good range of Engine Parts - OS on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6297 products in 334 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6297 products in 334 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.