Screws Grub Categories
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.
You may also be interested in
Knobs Pointer
Knobs - Pointer - Skirted
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.
Related Information:
There is also a good range of Knobs - Pointer - Skirted on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Screws - Button - Socket - 304 Stainless
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - 304 Stainless on the Small Parts and Bearings website.
Screws - Button - Socket - Alloy Steel
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Button - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Cap - Socket - 303 - 304 Stainless
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - 303 - 304 Stainless on the Small Parts and Bearings website.
Screws - Cap - Socket - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Cap - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Cap - Socket - Titanium CP Grade 1 - DIN912
Metric Sizes to DIN912. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Cap - Socket - Titanium CP Grade 1 - DIN912 on the Small Parts and Bearings website.
Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912
Metric Sizes to DIN912. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912 on the Small Parts and Bearings website.
Screws - Countersunk - 304 Stainless - Philips
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - 304 Stainless - Philips on the Small Parts and Bearings website.
Screws - Countersunk - Brass - Slotted
Flat Head Countersunk METRIC and BSW
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - Brass - Slotted on the Small Parts and Bearings website.
Screws - Countersunk - Socket - 304 Stainless
Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.
Related Information:
There is also a good range of Screws - Countersunk - Socket - 304 Stainless on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Aluminium
Flat Head Countersunk UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Steel on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991 on the Small Parts and Bearings website.
Screws - Countersunk - Stainless - Pozidrive
Flat Head Countersunk. Metric small selection only.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Hex Head - Brass on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Full Thread on the Small Parts and Bearings website.
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Hex Head - Titanium CP Grade 1 on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Philips on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Self Tapping - Countersunk - Philips - 304 Stainless
Countersunk screws length includes head. ie, the full overall length of the screw.
There is also a good range of Screws - Self Tapping - Countersunk - Philips - 304 Stainless on the Small Parts and Bearings website.
Screws - Self Tapping - For Hard or Soft Plastics - Pan Head
Tri-Lobe Course Thread Plastic Threading Screws
Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.
There is also a good range of Screws - Self Tapping - For Hard or Soft Plastics - Pan Head on the Small Parts and Bearings website.
Screws - Self Tapping - For Soft Plastics - Pan Head
Tri-Lobe Course Thread Plastic Threading Screws
Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.
There is also a good range of Screws - Self Tapping - For Soft Plastics - Pan Head on the Small Parts and Bearings website.
Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
There is also a good range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless on the Small Parts and Bearings website.
Screws - Self Tapping - Pan Head - Zinc Plated
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
There is also a good range of Screws - Self Tapping - Pan Head - Zinc Plated on the Small Parts and Bearings website.
Screws - Wood - Brass
Brass wood screws for models
There is also a good range of Screws - Wood - Brass on the Small Parts and Bearings website.
Hobby - Screw and Nut Combo Packs
Selection of Screw and Nut Combos. Includes Dubro Range
There is also a good range of Hobby - Screw and Nut Combo Packs on the Small Parts and Bearings website.
Hobby - Screw Packs
Hobby Screw Packs. Includes Dubro Range
There is also a good range of Hobby - Screw Packs on the Small Parts and Bearings website.
Washers - Cup - Aluminium
For countersunk screws.
Aluminium solid cup washers.
There is also a good range of Washers - Cup - Aluminium on the Small Parts and Bearings website.
Washers - Cup - Stainless Steel
For countersunk screws.
Stainless Steel cup washers.
There is also a good range of Washers - Cup - Stainless Steel on the Small Parts and Bearings website.
Tools - Thread Repair
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
There is also a good range of Tools - Thread Repair on the Small Parts and Bearings website.
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.
Washers - Cup - Nylon
Countersunk washers for use with screws for decorative finishing
There is also a good range of Washers - Cup - Nylon on the Small Parts and Bearings website.
Ties - Cable - With Mounting Holes
Cable ties with screw mounting holes.
There is also a good range of Ties - Cable - With Mounting Holes on the Small Parts and Bearings website.
Inserts - Self Tapping - For Aluminium - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Plastics - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - Recoil Starter Sets
Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.
Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)
Hobby and Engineering Supplies offers 6307 products in 341 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.
Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.
