Screws Round Head Categories
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.
You may also be interested in
Screws Pan Head
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Philips on the Small Parts and Bearings website.
Screws Hex Head
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Hex Head - Brass on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Full Thread on the Small Parts and Bearings website.
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Hex Head - Titanium CP Grade 1 on the Small Parts and Bearings website.
Screws Pan Head
Screws - Pan Head - 303-304 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
There is also a good range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless on the Small Parts and Bearings website.
Screws - Self Tapping - Pan Head - Zinc Plated
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
There is also a good range of Screws - Self Tapping - Pan Head - Zinc Plated on the Small Parts and Bearings website.
Screws - Cap - Socket - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Button - Socket - 304 Stainless
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - 304 Stainless on the Small Parts and Bearings website.
Screws - Button - Socket - Alloy Steel
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
There is also a good range of Screws - Button - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Cap - Socket - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - Alloy Steel on the Small Parts and Bearings website.
Screws - Countersunk - Brass - Slotted
Flat Head Countersunk METRIC and BSW
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - Brass - Slotted on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Aluminium
Flat Head Countersunk UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Steel on the Small Parts and Bearings website.
Screws - Countersunk - Stainless - Pozidrive
Flat Head Countersunk. Metric small selection only.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Self Tapping - For Soft Plastics - Pan Head
Tri-Lobe Course Thread Plastic Threading Screws
Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.
There is also a good range of Screws - Self Tapping - For Soft Plastics - Pan Head on the Small Parts and Bearings website.
Screws - Cap - Socket - 303 - 304 Stainless
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
There is also a good range of Screws - Cap - Socket - 303 - 304 Stainless on the Small Parts and Bearings website.
Screws - Countersunk - 304 Stainless - Philips
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Countersunk - 304 Stainless - Philips on the Small Parts and Bearings website.
Screws - Countersunk - Socket - 304 Stainless
Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks.
Related Information:
There is also a good range of Screws - Countersunk - Socket - 304 Stainless on the Small Parts and Bearings website.
Screws - Self Tapping - For Hard or Soft Plastics - Pan Head
Tri-Lobe Course Thread Plastic Threading Screws
Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.
There is also a good range of Screws - Self Tapping - For Hard or Soft Plastics - Pan Head on the Small Parts and Bearings website.
Screws - Cap - Socket - Titanium CP Grade 1 - DIN912
Metric Sizes to DIN912. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Cap - Socket - Titanium CP Grade 1 - DIN912 on the Small Parts and Bearings website.
Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912
Metric Sizes to DIN912. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912 on the Small Parts and Bearings website.
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks.
Related Information:
There is also a good range of Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991 on the Small Parts and Bearings website.
Screws - Self Tapping - Countersunk - Philips - 304 Stainless
Countersunk screws length includes head. ie, the full overall length of the screw.
There is also a good range of Screws - Self Tapping - Countersunk - Philips - 304 Stainless on the Small Parts and Bearings website.
Switches - Rocker
20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.
Switchs are rated at 10amp @ 600VAC with finger safe screw terminals.
There is also a good range of Switches - Rocker on the Small Parts and Bearings website.
Snap Buttons - Double End
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.
There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.
Snap Buttons - Single End - Dog Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.
There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.
Snap Buttons - Single End - Spring Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.
There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.
Nuts - Hexagonal - Brass
UNC - UNF - BA - METRIC.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.
There is also a good range of Nuts - Hexagonal - Brass on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Screws - Wood - Brass
Brass wood screws for models
There is also a good range of Screws - Wood - Brass on the Small Parts and Bearings website.
Spacers - Round - Hobby
Inexpensive nylon spacers for hobby applications
There is also a good range of Spacers - Round - Hobby on the Small Parts and Bearings website.
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
There is also a good range of Spacers - Round - Through Bore - Aluminium on the Small Parts and Bearings website.
Bungs - Round
Plastic bungs fit inside round tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Round on the Small Parts and Bearings website.
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.
Rod - Round - Soft Metal Packs
For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
There is also a good range of Rod - Round - Soft Metal Packs on the Small Parts and Bearings website.
Rod - Round - Stainless Steel
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.
Rod - Round - Urethane
Hard urethane rubber compound. Machinable.
Length +/- 3.2mm. Diameter +/- 2 percent.
Related Information:
There is also a good range of Rod - Round - Urethane on the Small Parts and Bearings website.
Tips - Round
Plastic tips fit over outside of tubing.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.
There is also a good range of Tips - Round on the Small Parts and Bearings website.
Tube - Round - Aluminium
Hollow round tubing for general hobby applications.
For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.
Related Information:
There is also a good range of Tube - Round - Aluminium on the Small Parts and Bearings website.
Tube - Round - Brass
Hollow round tubing for general hobby applications.
For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.
Related Information:
There is also a good range of Tube - Round - Brass on the Small Parts and Bearings website.
Tube - Round - Copper
Hollow round tubing for general hobby applications.
For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.
Related Information:
There is also a good range of Tube - Round - Copper on the Small Parts and Bearings website.
Tube - Round - Soft Metal Packs
For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths for general hobby applications. Includes K&S Metals range and more. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
There is also a good range of Tube - Round - Soft Metal Packs on the Small Parts and Bearings website.
Tube - Round - Stainless Steel
Hollow round tubing for general hobby applications.
For general hobby applications. Includes K&S Metals range and more. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
There is also a good range of Tube - Round - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Contact Us
Charity
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Polyvee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Push On and Push In Rings
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Thumb Screws and Nuts
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Ondrives
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Small Parts Inc
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)
Hobby and Engineering Supplies offers 6313 products in 265 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.
