Hobby & Engineering Supplies - an MBA company

Spring Motors Categories


Springs Compression


Springs - Compression - Stainless Steel
Springs - Compression - Stainless Steel

Also see combined categories:
All Compression Springs

This category includes short and long lengths

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote. This category may be available in the new MBA online store at Springs - Compression - Stainless Steel.

Related Information:

There is also a good range of Springs - Compression - Stainless Steel on the Small Parts and Bearings website.


Springs Constant Force


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum. This category may be available in the new MBA online store at Springs - Constant Force.

Related Information:

There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.


Springs Extension


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic. This category may be available in the new MBA online store at Springs - Extension - Stainless Steel.

Related Information:

There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.


Strip


Strip - Spring Steel
Strip - Spring Steel

Also see combined categories:
All Metal Strip

Hundreds of uses.

Hardened and tempered spring steel strip. Note that the width of this strip may vary up to a few mm as it is guillotine cut from sheet. If you require a closer tolerance on the strip width please contact us prior to ordering. This category may be available in the new MBA online store at Strip - Spring Steel.

There is also a good range of Strip - Spring Steel on the Small Parts and Bearings website.


Spring Wire


Wire - Steel - Spring - Music Wire - Short Lengths
Wire - Steel - Spring - Music Wire - Short Lengths

Also see combined categories:
All Spring Wire

SAE 1090 Spring Steel. Includes inch and metric sizes.

Metric and imperial. Shipped in sturdy mail tubes. This category may be available in the new MBA online store at Wire - Steel - Spring - Music Wire - Short Lengths.

Related Information:

There is also a good range of Wire - Steel - Spring - Music Wire - Short Lengths on the Small Parts and Bearings website.


Snap Buttons


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Spring Leg.

There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.


Clutches


Clutch Parts - Remote Control
Clutch Parts - Remote Control


Clutch Shoes, Springs, Clutch Bells

Clutch Shoes, Springs, Bells and Complete for Remote Control Cars. This category may be available in the new MBA online store at Clutch Parts - Remote Control.


You may also be interested in

RC Nitro Engine Parts


2212 Outrunner Motor AXI Parts
2212 Outrunner Motor AXI Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Spa Jet


Motor Bearing Many Parts
Motor Bearing Many Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Motor Bearing Many Parts on the Small Parts and Bearings website.


Motors DC


Motors - DC 12.0X30.0 mm
Motors - DC 12.0X30.0 mm

Also see combined categories:
All DC Motors

6.0V - 22800 RPM

This category may be available in the new MBA online store at Motors - DC 12.0X30.0 mm.

Related Information:

There is also a good range of Motors - DC 12.0X30.0 mm on the Small Parts and Bearings website.


Motors - DC 22.4X38.0 mm
Motors - DC 22.4X38.0 mm

Also see combined categories:
All DC Motors

This category may be available in the new MBA online store at Motors - DC 22.4X38.0 mm.

Related Information:

There is also a good range of Motors - DC 22.4X38.0 mm on the Small Parts and Bearings website.


Motors - DC 23.8X30.6 mm
Motors - DC 23.8X30.6 mm

Also see combined categories:
All DC Motors

12 VDC - 12,300 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 23.8X30.6 mm.

Related Information:

There is also a good range of Motors - DC 23.8X30.6 mm on the Small Parts and Bearings website.


Motors - DC 24.3X12.35 mm
Motors - DC 24.3X12.35 mm

Also see combined categories:
All DC Motors

6.0 VDC - 4,900 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 24.3X12.35 mm.

Related Information:

There is also a good range of Motors - DC 24.3X12.35 mm on the Small Parts and Bearings website.


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:

There is also a good range of Motors - DC 6mm Diameter on the Small Parts and Bearings website.


Motors - DC 8.0X10.0 mm
Motors - DC 8.0X10.0 mm

Also see combined categories:
All DC Motors

3.5V - 20500 RPM

This category may be available in the new MBA online store at Motors - DC 8.0X10.0 mm.

Related Information:

There is also a good range of Motors - DC 8.0X10.0 mm on the Small Parts and Bearings website.


Motors Stepper


Motors - Stepper - Basic Hobby
Motors - Stepper - Basic Hobby

Also see combined categories:
All Stepper Motors

Small light weight stepper motor for your hobby or light duty projects

This category may be available in the new MBA online store at Motors - Stepper - Basic Hobby.


Motors Vibrating


Motors - Vibrating
Motors - Vibrating

Also see combined categories:
All Vibrating Motors

This category may be available in the new MBA online store at Motors - Vibrating.

There is also a good range of Motors - Vibrating on the Small Parts and Bearings website.


Motors - Vibrating - Pager
Motors - Vibrating - Pager

Also see combined categories:
All Vibrating Motors

Includes vibrating disc motor

This category may be available in the new MBA online store at Motors - Vibrating - Pager.

There is also a good range of Motors - Vibrating - Pager on the Small Parts and Bearings website.


Snap Buttons


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Double End.

There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.


Hobby Servo Motors


Servo Motor - Brackets
Servo Motor - Brackets

Also see combined categories:
All Servo Accessories

Brackets to suit servo motors for robotic applications

This category may be available in the new MBA online store at Servo Motor - Brackets.


RC Car Parts


Assassin Mid Motor and Stock Option Corally Parts
Assassin Mid Motor and Stock Option Corally Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Twin Force -Motor Truck Kyosho Parts
Twin Force -Motor Truck Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Snap Buttons


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Dog Leg.

There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.


Dental Handpiece Parts


Micromat-Athlet Type H240B Motor Muss Parts
Micromat-Athlet Type H240B Motor Muss Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromat-Athlet Type H240B Motor Muss Parts on the Small Parts and Bearings website.


Brushless Motor Bearings


Park 480 E-Flite Parts
Park 480 E-Flite Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Park 480 E-Flite Parts on the Small Parts and Bearings website.


RC Spare Parts


Heatsink - Remote Control
Heatsink - Remote Control


Motor Heatsinks for Remote Control Cars

This category may be available in the new MBA online store at Heatsink - Remote Control.


Gearmotors Basic


Gearmotors - Basic - Hobby - 12.1mm Diameter
Gearmotors - Basic - Hobby - 12.1mm Diameter

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications. This category may be available in the new MBA online store at Gearmotors - Basic - Hobby - 12.1mm Diameter.

There is also a good range of Gearmotors - Basic - Hobby - 12.1mm Diameter on the Small Parts and Bearings website.


Couplings Helical and Slit


Couplings - Helical - Economy
Couplings - Helical - Economy

Also see combined categories:
All Helical and Slit Couplings

Low cost aluminium couplings primarily used for 3D printer stepper motors

Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm. This category may be available in the new MBA online store at Couplings - Helical - Economy.

Related Information:

There is also a good range of Couplings - Helical - Economy on the Small Parts and Bearings website.


Clips


R Clips - Single Coil - Steel
R Clips - Single Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins

Material: Spring Wire. This category may be available in the new MBA online store at R Clips - Single Coil - Steel.

There is also a good range of R Clips - Single Coil - Steel on the Small Parts and Bearings website.


Pins Ball Lock


Pins - Ball Lock - Keyring Style - Steel
Pins - Ball Lock - Keyring Style - Steel

Also see combined categories:
All Ball Lock Pins
All Keyring Style Ball Lock Pins

Economical pins that can be used in military or conventional equipment.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Positive lock detent pins. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins. This category may be available in the new MBA online store at Pins - Ball Lock - Keyring Style - Steel.

Related Information:

There is also a good range of Pins - Ball Lock - Keyring Style - Steel on the Small Parts and Bearings website.


GPV1 Motorbike Venom Parts
GPV1 Motorbike Venom Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Wheels - Robotic - Motorised
Wheels - Robotic - Motorised

Also see combined categories:
All Wheels

Motorised wheels for robotic and other applications

See also tracks for robotic applications. This category may be available in the new MBA online store at Wheels - Robotic - Motorised.


Honda NR 500 Motorcycle Bearings Kyosho Parts
Honda NR 500 Motorcycle Bearings Kyosho Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Micromotor Aquilon 830 - 850 Bien Air Parts
Micromotor Aquilon 830 - 850 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Aquilon 830 - 850 Bien Air Parts on the Small Parts and Bearings website.


Micromotor Isolite 100 and 300 Bien Air Parts
Micromotor Isolite 100 and 300 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor Isolite 100 and 300 Bien Air Parts on the Small Parts and Bearings website.


Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts
Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts on the Small Parts and Bearings website.


Micro-Motor Saeshin Parts
Micro-Motor Saeshin Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Micro-Motor Saeshin Parts on the Small Parts and Bearings website.


Gearmotors - DC - Low Voltage
Gearmotors - DC - Low Voltage

Also see combined categories:
All Low Voltage DC Gearmotors

Reversible - Low Voltage - Self Starting.

Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel. This category may be available in the new MBA online store at Gearmotors - DC - Low Voltage.

There is also a good range of Gearmotors - DC - Low Voltage on the Small Parts and Bearings website.


Gearmotors - Open Gear
Gearmotors - Open Gear


Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.

This category may be available in the new MBA online store at Gearmotors - Open Gear.

There is also a good range of Gearmotors - Open Gear on the Small Parts and Bearings website.


5x5 Mega Engine Serpent Parts
5x5 Mega Engine Serpent Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


2C - 28 RR Engine Bluebird Parts
2C - 28 RR Engine Bluebird Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


53 Glow Engine - 60 Rossi Parts
53 Glow Engine - 60 Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


53 Glow Engine - 90 Rossi Parts
53 Glow Engine - 90 Rossi Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Glow Engine - 1.5 MVVS Parts
Glow Engine - 1.5 MVVS Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Glow Engine - 40 MVVS Parts
Glow Engine - 40 MVVS Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Disc Springs PDF Dowel Pins PDF Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form McMaster Carr Cross Reference PDF Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 5838 products in 246 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 5838 products in 246 categories including low priced hobby bearings, screws, brass and aluminium rod and tubing, shim - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.