Hobby & Engineering Supplies - an MBA company

Washers Flat Fibre Categories


Washers - Flat - Fibre
Washers - Flat - Fibre

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Related Information:

There is also a good range of Washers - Flat - Fibre on the Small Parts and Bearings website.


You may also be interested in

Washers Flat Metallic


Washers - Flat - Aluminium
Washers - Flat - Aluminium

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.


Related Information:

There is also a good range of Washers - Flat - Aluminium on the Small Parts and Bearings website.


Washers - Flat - Brass - Commercial
Washers - Flat - Brass - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Related Information:

There is also a good range of Washers - Flat - Brass - Commercial on the Small Parts and Bearings website.


Washers - Flat - Mild Steel
Washers - Flat - Mild Steel

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Related Information:

There is also a good range of Washers - Flat - Mild Steel on the Small Parts and Bearings website.


Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:

There is also a good range of Washers - Flat - Stainless Steel 304 - Commercial on the Small Parts and Bearings website.


Washers - Cup - Aluminium
Washers - Cup - Aluminium

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers.

There is also a good range of Washers - Cup - Aluminium on the Small Parts and Bearings website.


Washers - Cup - Nylon
Washers - Cup - Nylon

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing


There is also a good range of Washers - Cup - Nylon on the Small Parts and Bearings website.


Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.

There is also a good range of Washers - Cup - Stainless Steel on the Small Parts and Bearings website.


Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

There is also a good range of Washers - Lock - Internal Tooth - Stainless Steel on the Small Parts and Bearings website.


Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel


There is also a good range of Washers - Lock - Split - Stainless Steel on the Small Parts and Bearings website.


Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches.

There is also a good range of Washers - Lock - Split - Steel on the Small Parts and Bearings website.


Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

There is also a good range of Washers - Lock - Split - Titanium CP Grade 1 on the Small Parts and Bearings website.


Hobby - Washer Packs
Hobby - Washer Packs


Hobby Washer Packs. Includes Dubro Range



Several Dental Washers Parts
Several Dental Washers Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Several Dental Washers Parts on the Small Parts and Bearings website.


40 Four Spline Prop Drive Washer - 78 Fox Parts
40 Four Spline Prop Drive Washer - 78 Fox Parts


Bearings and Spare Parts for Remote Control Models

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Dubro Accessories Listed by Description
Dubro Accessories Listed by Description


Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.


Assortment Kits - Various
Assortment Kits - Various


Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.


Sheet - Carbon Fibre
Sheet - Carbon Fibre

Also see combined categories:
All Sheet
All Non Metallic Sheet

3K Solid Sheet

Standard delivery charge applies for this product.

There is also a good range of Sheet - Carbon Fibre on the Small Parts and Bearings website.


Materials - Cloth - Carbon Fibre
Materials - Cloth - Carbon Fibre

Also see combined categories:
All Materials

Carbon Fibre Cloth

Standard delivery charge applies for this product.

Related Information:


Rod - Round - Carbon Fibre
Rod - Round - Carbon Fibre

Also see combined categories:
All Non Metallic Rod - Round

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

There is also a good range of Rod - Round - Carbon Fibre on the Small Parts and Bearings website.


Rod - Round - Glass Fibre
Rod - Round - Glass Fibre

Also see combined categories:
All Plastic Rod

High impact light weight fibreglass for modelling and kites.

Glass fibre rod is more flexible and less brittle than carbon fibre rod.

There is also a good range of Rod - Round - Glass Fibre on the Small Parts and Bearings website.


Tube - Round - Carbon Fibre
Tube - Round - Carbon Fibre

Also see combined categories:
All Non Metallic Tube - Round

High impact light weight carbon fibre hollow tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

There is also a good range of Tube - Round - Carbon Fibre on the Small Parts and Bearings website.


Tube - Square - Carbon Fibre - Round Hole
Tube - Square - Carbon Fibre - Round Hole

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

There is also a good range of Tube - Square - Carbon Fibre - Round Hole on the Small Parts and Bearings website.


Tube - Square - Carbon Fibre - Square Hole
Tube - Square - Carbon Fibre - Square Hole

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

There is also a good range of Tube - Square - Carbon Fibre - Square Hole on the Small Parts and Bearings website.


Kites - Spare Parts
Kites - Spare Parts

Also see combined categories:
All Kites

Accessories for all your kite needs. Replacement Rods and Tubes can be found under Carbon Fibre. Rod and tube connectors are under Connectors

Handles, lines, tails and winders.


Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.


Screws - Countersunk - Brass - Slotted
Screws - Countersunk - Brass - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk METRIC and BSW

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - Brass - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Aluminium
Screws - Countersunk - Socket - Aluminium

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Aluminium on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Steel on the Small Parts and Bearings website.


Screws - Countersunk - Stainless - Pozidrive
Screws - Countersunk - Stainless - Pozidrive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - Stainless - Pozidrive on the Small Parts and Bearings website.


Screws - Countersunk - 304 Stainless - Philips
Screws - Countersunk - 304 Stainless - Philips

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - 304 Stainless - Philips on the Small Parts and Bearings website.


Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - 304 Stainless on the Small Parts and Bearings website.


Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991 on the Small Parts and Bearings website.


Nuts - Hexagonal - Brass
Nuts - Hexagonal - Brass

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.

There is also a good range of Nuts - Hexagonal - Brass on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6213 products in 445 categories including assortment kits, low priced hobby bearings, tools, screws, brass and aluminium rod and tubing - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Hobby & Engineering Supplies Pty Ltd (ABN 54 125 001 541)

Hobby and Engineering Supplies offers 6213 products in 445 categories including assortment kits, low priced hobby bearings, tools, screws, brass and aluminium rod and tubing - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Hobby and Engineering Supplies is part of MBA Group offering a select range from the MBA Group catalogue.

Hobby and Engineering Supplies products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Hobby and Engineering Supplies 1997. All rights reserved.